Netgear MBR1310 MBR1310 User Manual - Page 59
Show Statistics, Click the, button on the Router Status screen to display router usage, statistics - reset
View all Netgear MBR1310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
NETGEAR Mobile Broadband 11n Wireless Router MBR1310 Field Wireless Port (See Manually Configure Your Wireless Settings on page 26. Name (SSID) Region Channel Mode Wireless AP Broadcast Name Wireless Isolation Wi-Fi Protected Setup Description The service set ID, also known as the wireless network name. The country where the unit is set up for use. The current channel, which determines the operating frequency. The current mode, which determines the maximum data speed. Indicates if the access point feature is disabled or not. If not enabled, the Wireless LED on the front panel is off. Indicates if the router is configured to broadcast its SSID. Indicates whether wireless isolation is enabled or disabled. Indicates status of the Wi-Fi Protected Setup. Show Statistics Click the Show Statistics button on the Router Status screen to display router usage statistics: The following table explains the statistic fields. Field Status TxPkts RxPkts Collisions Tx B/s Rx B/s Up Time Description The link status. Note that LAN2, LAN3, and LAN4 are guest networks. The number of packets transmitted on this port since reset or manual clear. The number of packets received on this port since reset or manual clear. The number of collisions on this port since reset or manual clear. The average egress line utilization for this port. The average ingress line utilization for this port. The time elapsed since the last power cycle or reset. Managing Your Network 59