Netgear ME103 ME103 Reference Manual - Page 35
Information to Gather Before Changing Basic Wireless Settings, Wireless Network Name SSID
UPC - 606449026375
View all Netgear ME103 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Reference Manual for the ME103 802.11b ProSafe Wireless Access Point Information to Gather Before Changing Basic Wireless Settings Before customizing your wireless settings, print this form and record the following information. If you are working with an existing wireless network, the person who set up or is responsible for the network will be able to provide this information. Otherwise, you will choose the settings for your wireless network. Either way, record the settings for your wireless network in the spaces below. • Wireless Network Name (SSID The SSID, identifies the wireless network. You can use up to 32 alphanumeric characters. The SSID is case sensitive. Note: The SSID in the wireless adapter card must match the SSID of the wireless access point. In some configuration utilities (such as in Windows XP), the term "wireless network name" is used instead of SSID. • Authentication. Circle one: Open System or Shared Key. Authentication is unrelated to encryption of data transmissions. Shared Key provides more network access security. Note: If you select Shared Key, the other devices in the network will not connect unless they are set to Shared Key as well and are configured with the correct key. • WEP Encryption key size. Choose one: 64-bit or 128-bit. 128-bit provides stronger data security. Again, the encryption key size must be the same for the wireless adapters and the wireless access point. • Data Encryption (WEP) Keys. There are two methods for creating WEP data encryption keys. Whichever method you use, record the key values in the spaces below. - Passphrase method These characters are case sensitive. Enter a word or group of printable characters. When you enter the Passphrase and click the Generate Key button on the ME103, the keys will be generated. - Manual method. These values are not case sensitive. For 64-bit WEP, enter 10 hex digits (any combination of 0-9 or a-f). For 128-bit WEP, enter 26 hex digits. Key 1 Key 2 Key 3 Key 4 Use the procedures described in the following sections to configure the ME103. Store this information in a safe place. Basic Installation and Configuration August 2003 3-14