Netgear ME103 ME103 Reference Manual - Page 56
and click OK., This command causes a continuous ping to be sent. Between several seconds to two
UPC - 606449026375
View all Netgear ME103 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Reference Manual for the ME103 802.11b ProSafe Wireless Access Point Figure 5-5: Information Activity Log for starting a 802.1x wireless connection The simplest method is to ping the LAN IP address of another computer on the Ethernet LAN. a. From a wireless PC, on the Windows taskbar click the Start button, then click Run. b. Type ping -t 192.168.0.1 , and click OK. Figure 5-6: Running a Ping test from Windows c. This command causes a continuous ping to be sent. Between several seconds to two minutes, the ping response should change from "timed out" to "reply." 5-6 Advanced Configuration August 2003
Reference Manual for the ME103 802.11b ProSafe Wireless Access Point
5-6
Advanced Configuration
August 2003
Figure 5-5:
Information Activity Log for starting a 802.1x wireless connection
The simplest method is to ping the LAN IP address of another computer on the Ethernet LAN.
a.
From a wireless PC, on the Windows taskbar click the Start button, then click Run.
b.
Type
ping -t 192.168.0.1
, and click OK.
Figure 5-6:
Running a Ping test from Windows
c.
This command causes a continuous ping to be sent. Between several seconds to two
minutes, the ping response should change from “timed out” to “reply.”