Netgear ME103 ME103 Reference Manual - Page 68
Using the Reset Button to Restore Factory Default Settings, Reboot., Reset to Factory Defaults.
UPC - 606449026375
View all Netgear ME103 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Reference Manual for the ME103 802.11b ProSafe Wireless Access Point • If the PCs are configured correctly, but still not working, ensure that the ME103 is connected and turned on. Connect to it and check its settings. If you cannot connect to it, check the LAN and power connections. • If the ME103 is configured correctly, check your Internet connection (DSL/Cable modem etc.) to make sure that it is working correctly. Using the Reset Button to Restore Factory Default Settings The Reset button (see "ME103 Wireless Access Point Rear Panel" on page 2-7) has two functions: • Reboot. When pressed and released quickly, the ME103 will reboot (restart). • Reset to Factory Defaults. This button can also be used to clear ALL data and restore ALL settings to the factory default values. To clear all data and restore the factory default values: 1. Power off the ME103 and power it back on. 2. Use something with a small point, such as a pen, to press the Reset button in and hold it in for at least 5 seconds. 3. Release the Reset button. The factory default configuration has now been restored, and the ME103 is ready for use. 6-4 Troubleshooting August 2003