Netgear WPN802v2 WPN802v2 Reference Manual - Page 23
Access Point Name, IP Address, DHCP Client, IP Subnet Mask, Default Gateway Address, Primary DNS - default ip
View all Netgear WPN802v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Reference Manual for the NETGEAR RangeMax™ Wireless Access Point WPN802 3. Click the Basic Settings link to configure the IP Settings for your network. The Basic Settings menu appears: Figure 3-3: Basic Settings menu 4. Configure the Basic Settings for your network. • Access Point Name: The unique NetBIOS name. The default Access Point Name is located on the bottom label of the WPN802. You may modify the default name with a unique name up to 15 characters long. • IP Address: By default, the Access Point is set to be a DHCP (Dynamic Host Configuration Protocol) client disabled. The default IP address is 192.168.0.231. • DHCP Client: You may enable the DHCP client to let the Access Point get its TCP/IP configuration from the DHCP server on your network. • IP Address: Type the IP address of your Access Point (factory default: 192.168.0.231). • IP Subnet Mask: The Access Point automatically calculates the subnet mask based on the IP address that you assign. Otherwise, you can use 255.255.255.0 as the subnet mask. • Default Gateway Address: The Access Point will use this IP address default gateway for any traffic beyond the local network. • Primary DNS Server: The Access Point will use this IP address as the primary Domain Name Server used by stations on your LAN. Basic Installation and Configuration 3-5 202-10101-01, 4 May 2005