Nokia 770 Internet Tablet OS 2006 Edition in English - Page 33

Communicate over the Web 4. Account setup 3/4 - Define the following settings: Incoming server - Enter the host name or IP address of the POP3 or IMAP4 server that receives your e-mail. Outgoing server (SMTP) - Enter the host name or IP address of the server through which your e-mail is sent. Tap Next. Simple mail transfer protocol (SMTP) servers are used when sending e-mail. To be able to send e-mail, you must define the SMTP host name or IP address, which you obtain from the service provider of the connection you use. Use connection-specific SMTP servers: - Select this option if you want to use connection specific SMTP servers for sending e-mail messages. Tip: The SMTP host name or IP address may be different from the host name or IP address of the incoming server (POP3 or IMAP4). For example, when you access your Internet service provider e-mail over a cellular network, you may need to utilize the SMTP server of the cellular network. Thus, you may need to configure as many mailboxes as you have Internet access networks, each mailbox having a different SMTP host name or IP address. 5. In Account setup 4/4, tap Finish to complete the mailbox setup, or Advanced to define optional e-mail settings. Retrieve and read e-mail E-mail sent to you is not automatically received by your device, but by your remote mailbox on the e-mail server. To read your e-mail, you must first connect to the mailbox and retrieve the e-mail messages to your device. To retrieve e-mail from a remote mailbox, select E-mail > E-mail > Send & receive. Select to retrieve e-mail from all mailboxes or from a selected mailbox. If you have e-mail in the Outbox folder, these messages are sent simultaneously. To open a message, tap twice the header of the message you want to read. Copyright © 2006 Nokia. All rights reserved. 33