Nokia IP290 Installation Guide - Page 67
then push the top of the battery firmly into the securing clips.
View all Nokia IP290 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Replacing the Battery The battery is in a battery holder to the side of the power supply. Power supply Battery securing clips 00613 7. To remove the old battery, hold on to the holder with one hand while you push the top of the battery toward the power supply to release it from the securing clips and lift the battery out of the holder Caution Replace the battery only with the same or equivalent type battery recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions. 8. With the positive side toward the power supply, and with the top of the battery angled toward the power supply, slide the bottom of the new battery into the battery holder, and then push the top of the battery firmly into the securing clips. Caution You must place the new battery into the battery holder observing the correct polarity. 9. Slide the chassis tray assembly back into the appliance. 10. Resecure the two chassis tray assembly retaining screws. Nokia IP290 Security Platform Installation Guide 67