Nokia N93 User Guide - Page 86
Pair devices, Options, Via Bluetooth, Sending, Messag., Bluetooth, New paired device
View all Nokia N93 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Connectivity 2 Select the item and Options > Send > Via Bluetooth. Devices with Bluetooth technology within range start to appear on the display. Device icons are: computer, phone, audio or video device, and other device. To interrupt the search, select Stop. 3 Select the device with which you want to connect. 4 If the other device requires pairing before data can be transmitted, a tone sounds, and you are asked to enter a passcode. See 'Pair devices', p. 86. 5 When the connection has been established, Sending data is shown. The Sent folder in Messag. does not store messages sent using Bluetooth connectivity. Tip! When searching for devices, some devices may show only the unique address (device address). To find the unique address of your device, enter the code *#2820# in the standby mode. Pair devices To open the paired devices view ( application main view, press . ), in the Bluetooth Before pairing, create your own passcode (1-16 digits), and agree with the owner of the other device to use the same code. Devices that do not have a user interface have a factory-set passcode. The passcode is used only once. To pair with a device, select Options > New paired device. Devices with wireless Bluetooth technology within range start to appear on the display. Select the device, and enter the passcode. The same passcode must be entered on the other device as well. After pairing, the device is saved to the paired devices view. Paired devices are indicated by in the device search. To set a device as authorized or unauthorized, scroll to a device, and select from the following options: Set as authorised-Connections between your device and this device can be made without your knowledge. No separate acceptance or authorization is needed. Use this status for your own devices, such as your compatible headset or PC, or devices that belong to someone you trust. indicates authorized devices in the paired devices view. Set as unauthorised-Connection requests from this device must be accepted separately every time. To cancel a pairing, scroll to the device, and select Options > Delete. If you want to cancel all pairings, select Options > Delete all. Tip! If you are currently connected to a device and delete the pairing with that device, pairing is removed immediately, and the connection is switched off. 86