NordicTrack Grt490 English Manual - Page 12

19. Wrap the Leg Press Cable (76) around a 4" Pulley (35). Attach the Pulley and a Cable Trap (44) to the 19 welded bracket on the Stabilizer (5) with a 3/8" x 2" Bolt (62) and a 3/8" Nylon Locknut (50). 62 20. Remove the pre-assembled 4" Pulley (not shown) from the Pulley Bracket (91). 20 Attach the end of the Leg Press Cable (76) to the Pulley Bracket (91) with a 1/4" Flat Washer (71) and 25 a 1/4" Nylon Locknut (25). 71 Lay the Pulley Bracket (91) and the Leg Press Cable (76) aside; they will be attached in step 28. 35 44 Bracket 76 50 5 91 76 21. Identify the High Cable (73), which has a ball on one end and a bolt on the other end. 21 Feed the end of the High Cable (73) with the bolt up through the indicated slot in the Main Upright (3). Feed almost all of the Cable through the slot. Bolt 73 Slide a 3/8" Flat Washer (55) and a 5/8" x 1/2" Pulley Bushing (42) onto a 3/8" x 2 1/2" Bolt (54). Wrap the High Cable (73) around a 4" Pulley (35). Hold the Pulley inside the indicated slot in the Main Upright (3). Insert the 3/8" x 2 1/2" Bolt (54) through the Main Upright and the Pulley. Slide another 5/8" x 1/2" Pulley Bushing (42) and 3/8" Flat Washer (55) onto the 3/8" x 2 1/2" Bolt (54). Tighten a 3/8" Nylon Jamnut (63) onto the Bolt. 3 55 63 50 42 Remove the pre-assembled 4" Pulleys (35) from the Press Frame (12), and set them aside. Slot 54 35 55 42 59 Ball 35 12 12