NordicTrack Grt490 English Manual - Page 15
Wrap the High Cable 73 around a 4 Pulley 35.
View all NordicTrack Grt490 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
28. Wrap the High Cable (73) around a 4" Pulley (35). Attach the Pulley and a Cable Trap (44) to the top hole in the Pulley Bracket (91) attached to the Leg Press Cable (76), with a 3/8" x 1 3/4" Bolt (60) and a 3/8" Nylon Jamnut (63). 28 44 35 63 29. Feed the bolt on the High Cable (73) up through the next slot in the Top Frame (1). Wrap the High Cable (73) around a 4" Pulley (35) in the direction shown and attach the Pulley to the Top Frame (1) with a 3/8" x 2 1/2" Bolt (54), two 3/8" Flat Washers (55), two 5/8" x 1/2" Pulley Bushings (42), and a 3/8" Nylon Jamnut (63). 73 91 60 76 29 63 35 73 1 55 42 55 54 30. Feed the bolt on the High Cable (73) down through 30 the next slot in the Top Frame (1). 42 Wrap the High Cable (73) around a 4" Pulley (35) in the direction shown. Attach the Pulley to the Top Frame (1) with a 3/8" x 2 1/2" Bolt (54), two 3/8" Flat Washers (55), two 5/8" x 1/2" Pulley Bushings (42), and a 3/8" Nylon Jamnut (63). 35 63 55 Let the High Cable (73) hang over the weight stack; it will be attached in step 37. 1 73 55 54 31. Locate the Low Cable (72), which has a ball on each 31 end. Route the Low Cable through the indicated slots in the Leg Lever (29) and the front leg on the Base (8). 8 Attach a 4" Pulley (35) inside the slot in the front leg of the Base (8) with a 3/8" x 2 1/2" Bolt (54), two 3/8" Flat Washers (55), two 5/8" x 1/2" Pulley Bushings (42), and a 3/8" Nylon Jamnut (63). 72 35 42 63 55 Slots 15 29 42 54 55