Oki B4600 B4400 4500 4550 4600 User Guide (English) - Page 91

Replacing the image drum, Generating a cleaning B4400, Using the printer Status Monitor

Get Oki B4600 PDF manuals and user guides View all Oki B4600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 91 highlights

image drum when the print becomes faint or begins to deteriorate. Replacing the image drum It is recommended that you change the toner cartridge and clean the LED array at the same time as you change the image drum. CAUTION! The green image drum surface at the base of the cartridge is very delicate and light sensitive. Do not touch it and do not expose it to normal room light for more than 5 minutes. If the drum unit needs to be out of the printer for longer than this, please wrap the cartridge inside a black plastic bag to keep it away from light. Never expose the drum to direct sunlight or very bright room lighting. Always hold the image drum unit by the ends or from the top. 1. Press the cover release and open the printer's top cover fully. WARNING! If the printer has been powered on, the fuser may be hot. This area is clearly labeled. Do not touch. 2. Remove the used image drum and toner cartridge. 3. Follow the installation instructions on or inside the box containing the new image drum to install the new image drum. 4. Gently wipe the LED array surface with the LED lens cleaner that came with the new toner cartridge, or wipe with a soft tissue. 5. Close the top cover and press it down to latch it closed. Generating a cleaning page If the printed page shows signs of fading, streaking or erratic marks, the problem may be cleared by generating a drum cleaning page as follows. B4400 Using the printer Status Monitor 6. Start the Status Monitor for the printer. 7. Click on [Printer Setup] tab - [Printer Menu] button - [Test Print tab] - [Cleaning] button. B4400/4500/4550/4600 User's Guide 91

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
B4400/4500/4550/4600 User’s Guide
91
image drum when the print becomes faint or begins to
deteriorate.
Replacing the image drum
It is recommended that you change the toner cartridge and
clean the LED array at the same time as you change the image
drum.
CAUTION!
The green image drum surface at the base of the
cartridge is very delicate and light sensitive. Do not touch it and
do not expose it to normal room light for more than 5 minutes.
If the drum unit needs to be out of the printer for longer than
this, please wrap the cartridge inside a black plastic bag to keep
it away from light. Never expose the drum to direct sunlight or
very bright room lighting. Always hold the image drum unit by
the ends or from the top.
1.
Press the cover release and open the printer’s top cover
fully.
WARNING! If the printer has been powered on, the fuser may
be hot. This area is clearly labeled. Do not touch.
2.
Remove the used image drum and toner cartridge.
3.
Follow the installation instructions on or inside the box
containing the new image drum to install the new image
drum.
4.
Gently wipe the LED array surface with the LED lens
cleaner that came with the new toner cartridge, or wipe
with a soft tissue.
5.
Close the top cover and press it down to latch it closed.
Generating a cleaning page
If the printed page shows signs of fading, streaking or erratic
marks, the problem may be cleared by generating a drum
cleaning page as follows.
B4400
Using the printer Status Monitor
6.
Start the
Status Monitor
for the printer.
7.
Click on [Printer Setup] tab - [Printer Menu] button -
[Test Print tab] - [Cleaning] button.