Oki PRO510DW Pro510DW User's Guide - Page 80

APPENDIX A - DISPLAY PANEL MESSAGES The display panel messages are intended to be self-explanatory. Representative messages are given as examples below. MESSAGE Ready to Print Printing tttttt tttttt Near End cccccc Toner Low Fuser Unit Near Life Change Fuser Unit Invalid Data Press ONLINE Button Change Paper in tttttt mmmmmm pppppp Press ONLINE button Please see HELP for details Install Paper tttttt mmmmmm Please see HELP for details Install Tray tttttt Open Cover Paper Remains tttttt Please see HELP for details COMMENT Your printer is online and ready to print. Your printer is printing and paper is currently being fed from tttttt, where tttttt identifies a tray. The paper supply in the tray identified by tttttt will run out soon. The remaining toner of color cccccc is running low. The fuser unit is nearing the end of its working life. The fuser unit has reached the end of its working life and has to be changed. Invalid data has been received by the printer. Press the ONLINE button to clear this warning. There is a mismatch between the media in the tray and print data. Load media of size mmmmmm and type pppppp into tray tttttt. The message may remain for some time after you have closed the tray. You can have the printer ignore this error for the current print job by pressing the ONLINE button. You can access help details by pressing the HELP button. The printer has tried to take paper from an empty tray. Load media of size mmmmmm into tray tttttt. The message may remain for some time after you have closed the tray. You can access help details by pressing the HELP button. The printer has tried to take paper from a tray that has been removed. Ensure that tray tttttt is correctly located or put tray tttttt loaded with paper back into the printer. Additional paper has been detected after a paper jam has been cleared. Open tttttt side cover to check for additional paper. You can access help details by pressing the HELP button. User's Guide> 80