Olympus C7000 Zoom C-7000 Advanced Manual - Page 116

Measurement units (m/ft) 2 Press ac to set the year, then press d to move to the month setting. • To move back to the previous setting, press b. • The first two digits of the year are fixed. 3 Repeat this procedure until the date and time are completely set. 2004 . 01 . 01 SELECT 00 : 00 SET GO OK • The time is displayed in the 24-hour format. Consequently, 2 p.m. is displayed as 14:00. 4 Press e. • For a more accurate setting, press e when the time signal hits 00 seconds. Note • The date and time settings will be returned to the factory default settings if the camera is left without the battery for approximately 3 days. The settings will be canceled more quickly if the battery was only loaded in the camera for a short time before being removed. Before taking important pictures, check that the date and time settings are correct. • If the date and time setting is canceled, a warning is displayed on the monitor the next time the camera is turned on. g"Error codes" (P.156) 7 Measurement units (m/ft) The measurement unit can be selected from either meters or feet in the manual focus mode. m At long ranges, the camera measures in meters, and at short ranges in centimeters. ft At long ranges, the camera measures in feet, and at short ranges in inches. Mode dial Top menu [MODE MENU] [SETUP] [m/ft] [m] / [ft] g"Menus" (P.17) Settings 116