Olympus C7000 Zoom C-7000 Advanced Manual - Page 158
Monitor On].
UPC - 050332150706
View all Olympus C7000 Zoom manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Troubleshooting Possible cause Corrective action Ref. page The monitor does not turn on. The camera is set to [MONITOR OFF]. Press e in the shooting mode to display the top menu, then press c to select [MONITOR ON]. P.23 The viewfinder or monitor is hard to see. There is condensation* inside the camera. The brightness of the monitor is not adjusted properly. Turn the camera off and wait until it dries before turning it on again. Select [s] in the mode menu and adjust the brightness. - P.114 The monitor is exposed Block the sunlight with your hand or use the - to direct sunlight. viewfinder. Vertical lines appear on Aiming the camera at a bright subject in - the monitor screen sunlight may cause vertical lines to appear during shooting. on the screen. This is not a malfunction. The date recorded with the image data is wrong. The date/time is not set. Set the date/time. The clock adjustment is not factory-preset. P.115 The camera has been left with the battery removed. If the camera is left for 3 days with the battery removed, the date/time setting is canceled. Set the date/time again. P.115 The settings are returned to the factory default settings when the camera is turned off. [ALL RESET] is set to [ON]. Set [ALL RESET] to [OFF] in the mode menu. P.103 The picture is out of focus. The subject was too close. Move further away from the subject. To take pictures closer than 8 cm (3.2") with the zoom in the maximum WIDE position, use the super macro mode. P.36 The subject is dark. Set [AF ILLUMINATOR] to [ON] in the mode P.48 menu. Auto focus is not possible. Use manual focus or focus lock to focus on the subject and then shoot. P.50, 24 10 There is condensation* Turn the camera off and wait until it dries on the lens. before turning it on again. - Appendix 158