Olympus C7000 Zoom C-7000 Advanced Manual - Page 131
If an error code is displayed, Monitor indication, Possible cause, Corrective action
UPC - 050332150706
View all Olympus C7000 Zoom manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Direct printing (PictBridge) If an error code is displayed If an error code appears on the camera's monitor during direct print setting or printing, see the following table. For more details, refer to the printer's instruction manual. Monitor indication NO CONNECTION NO PAPER Possible cause Corrective action The camera is not connected Disconnect the camera and to the printer correctly. connect it again correctly. There is no paper in the printer. Load some paper in the printer. NO INK The printer has run out of Replace the ink cartridge in ink. the printer. JAMMED The paper is jammed. Remove the jammed paper. SETTINGS CHANGED The printer's paper cassette has been removed or the printer has been operated while making settings on the camera. Do not operate the printer while making settings on the camera. PRINT ERROR Turn off camera and printer. There is a problem with the Check the printer and printer and/or camera. remedy any problems before turning the power on again. TIPS • If an error code other than those shown above is displayed, see "Error 8 codes" (P.156). Printing pictures 131