Olympus C7000 Zoom C-7000 Advanced Manual - Page 161

Troubleshooting Possible cause Corrective action Ref. page The picture is too dark. The flash was blocked Hold the camera correctly, keeping your by your finger. fingers away from the flash. P.22 The subject was out of Shoot within the flash working range. the working range of the flash. P.37 The flash was closed. Press the flash button to make the flash pop up. P.37 The subject was too Set the flash to fill-in mode, or use the spot P.37, 52 small and was backlit. metering mode. The sequential shooting mode was used. Higher shutter speeds are used during sequential shooting, which may result in pictures that are darker than usual. Set [DRIVE] to [o] in the mode menu. P.70 The center of the subject If the center of the subject is too bright, the is too bright. image as a whole emerges darker. Adjust the exposure compensation toward plus (+). P.57 The aperture value Decrease the aperture value or set the setting is too large in A camera to P mode. (M) mode. P.43 The shutter speed setting is too fast in S (M) mode. Reduce the shutter speed or set the camera to P mode. P.44 The colors of pictures look unnatural. Indoor lighting affected Set the white balance according to the the picture's colors. lighting. P.58 No white in the picture. Include something white in the picture, or shoot using the fill-in flash mode. P.37 The white balance setting is wrong. Adjust the white balance according to the light source. P.58 Part of the picture is dark. The lens was partly Hold the camera correctly, keeping your blocked by your finger or fingers and the strap away from the lens. the strap. P.22 10 Appendix 161