Olympus C7000 Zoom C-7000 Advanced Manual - Page 70

Sequential shooting Note • Depending on the card, the remaining recording time may drop rapidly during recording. Try using the card again after formatting it with your camera. g "Formatting" (P.100) • In n mode, the flash and manual focus (MF) cannot be used. Notes for recording long movies • When the record mode is set to HQ, SQ1, or SQ2, recording will continue until the card is full unless stopped by pressing the shutter button. • A long recorded movie cannot be edited. (P.93) • If a single movie recording uses up all of the card's memory, create space on the card by erasing the movie or downloading it to a computer. Sequential shooting There are 3 sequential shooting modes: sequential shooting, high speed 5 sequential shooting and auto bracketing. To set a sequential shooting mode, go to [DRIVE] on the mode menu. Drive settings o Shoots 1 frame at a time when the shutter button is pressed. (Normal, single-frame shooting mode) j The focus, exposure and white balance are locked at the first frame. Approx. 10 frames at 1.1 frames/sec. (in HQ mode) i Pictures can be taken at a faster speed than normal sequential shooting. 7 A maximum of 2 frames at approx. 2.2 frames/sec. Under some conditions, you may obtain better results shooting with exposure compensation than by using the exposure setting considered optimal by the camera. When [7] is set, the exposure is changed automatically for each frame when you start shooting. The exposure differential and number of frames can be selected in the menus. The focus and white balance are locked at the first frame. Ex: When [7] is set to [±1.0] [×3] More useful functions -1.0 0.0 +1.0 70