Olympus C7000 Zoom C-7000 Advanced Manual - Page 92
Recording sound
UPC - 050332150706
View all Olympus C7000 Zoom manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Playback SET CARD EDIT PLAY Recording sound Sound can be added to a still picture that you have already taken. (This is known as "after-recording".) You can also re-record over the sound that has already been recorded. Total recording time per picture is approximately 4 seconds. Select the still picture to which you want to add sound. Mode dial Top menu [MODE MENU] [PLAY] [R] 1 Press d to display [START]. g"Menus" (P.17) START 2 Aim the camera microphone toward the sound you want to record and press e to start recording. 6 • The [BUSY] bar is displayed during recording. W T POWER Microphone Note • If the microphone is farther than 1 m (3.3 ft.) from the subject, sound may not be recorded properly. • If you re-record the sound, the original sound is erased. • You may not be able to record sound when there is insufficient card memory (the "CARD FULL" message is displayed). • Sound recording may pick up camera noises, such as button operation or shutter movement. • Once sound is added to a picture, it is not possible to erase only the sound. In this case, make a re-recording with silence. 92