Olympus SP-550UZ SP-550UZ Instruction Manual (English) - Page 69

When you get an error message on the camera - problems

Page 69 highlights

Getting to know your camera better When you get an error message on the camera Monitor indication q CARD ERROR q WRITE-PROTECT > MEMORY FULL q CARD FULL Possible cause There is a problem with the card. Corrective action This card cannot be used. Insert a new card. Writing to the card is prohibited. The recorded image has been protected (read-only) on a computer. Download the image to a computer and cancel the readonly setting. The internal memory has no available memory and cannot store any new data. Insert a card or erase unwanted data. Before erasing, backup the data of important pictures onto the card, or download such pictures to a computer. The card has no available memory and cannot store any new data. Replace the card or erase unwanted data. Before erasing, download important pictures to a computer. L NO PICTURE There are no pictures in the The internal memory or the card contains internal memory or on the no pictures. card. Record pictures. r PICTURE ERROR r THE IMAGE CANNOT BE EDITED There is a problem with the selected picture and it cannot be played back on this camera. If pictures taken by other cameras are selected, they cannot be edited. Use image processing software to view the picture on a computer. If that cannot be done, the image file is damaged. Use image processing software to edit the pictures. The card cover is open. Close the card cover. CARD-COVER OPEN g The battery is empty. BATTERY EMPTY Insert new batteries. When using rechargable batteries, charge the batteries. Recording has stopped to allow camera to cool. Please wait a moment. Camera is cooling. Please wait a moment. When [IMAGE STABILIZER] is set to [ON], the camera's internal temperature rises due to continuous movie recording for a long period, thereby causing shooting to stop. Allow the camera to cool down for some time before you begin shooting again. Or you can shoot with [IMAGE STABILIZER] set to [OFF]. CARD SETUP [xD] POWER OFF FORMAT SET OK This card cannot be used in this camera. Or, the card is not formatted. Format the card or replace. • Select [POWER OFF] and press o. Insert a new card. • Select [FORMAT][YES] and press o. All data on the card is erased. EN 69

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100

EN
69
Getting to know your camera better
When you get an error message on the camera
Monitor indication
Possible cause
Corrective action
q
CARD ERROR
There is a problem with the
card.
This card cannot be used. Insert a new
card.
q
WRITE-PROTECT
Writing to the card is
prohibited.
The recorded image has been protected
(read-only) on a computer. Download the
image to a computer and cancel the read-
only setting.
>
MEMORY FULL
The internal memory has no
available memory and
cannot store any new data.
Insert a card or erase unwanted data.
Before erasing, backup the data of
important pictures onto the card, or
download such pictures to a computer.
q
CARD FULL
The card has no available
memory and cannot store
any new data.
Replace the card or erase unwanted data.
Before erasing, download important
pictures to a computer.
L
NO PICTURE
There are no pictures in the
internal memory or on the
card.
The internal memory or the card contains
no pictures.
Record pictures.
r
PICTURE ERROR
There is a problem with the
selected picture and it
cannot be played back on
this camera.
Use image processing software to view the
picture on a computer. If that cannot be
done, the image file is damaged.
r
THE IMAGE CANNOT
BE EDITED
If pictures taken by other
cameras are selected, they
cannot be edited.
Use image processing software to edit the
pictures.
CARD-COVER OPEN
The card cover is open.
Close the card cover.
g
BATTERY EMPTY
The battery is empty.
Insert new batteries. When using
rechargable batteries, charge the
batteries.
Recording has
stopped to allow
camera to cool.
Please wait a
moment.
When [IMAGE STABILIZER]
is set to [ON], the camera's
internal temperature rises
due to continuous movie
recording for a long period,
thereby causing shooting to
stop.
Allow the camera to cool down for some
time before you begin shooting again. Or
you can shoot with [IMAGE STABILIZER]
set to [OFF].
Camera is cooling.
Please wait a
moment.
This card cannot be used in
this camera. Or, the card is
not formatted.
Format the card or replace.
Select [POWER OFF] and press
o
.
Insert a new card.
Select [FORMAT]
[YES] and press
o
. All data on the card is erased.
OK
SET
CARD SETUP
POWER OFF
FORMAT
[xD]