Olympus SP-550UZ SP-550UZ Instruction Manual (English) - Page 70

No Connection, No Paper, No Ink, Jammed, Settings, Changed, Print Error, Cannot Print, Monitor

Page 70 highlights

Monitor indication MEMORY SETUP [IN] POWER OFF MEMORY FORMAT SET OK NO CONNECTION NO PAPER NO INK Possible cause There is an error in the internal memory. The camera is not connected to the computer or printer correctly. There is no paper in the printer. The printer has run out of ink. The paper is jammed. Corrective action Select [MEMORY FORMAT][YES] and press o. All data in the internal memory is erased. Disconnect the camera and connect it again correctly. Load some paper in the printer. Replace the ink cartridge in the printer. Remove the jammed paper. JAMMED SETTINGS CHANGED PRINT ERROR r CANNOT PRINT The printer's paper tray has been removed or the printer has been operated while changing settings on the camera. Do not operate the printer while changing settings on the camera. There is a problem with the Turn off the camera and printer. Check the printer and/or camera. printer and remedy any problems before turning the power on again. Pictures recorded on other Use a computer to print. cameras may not be printed on this camera. Getting to know your camera better 70 EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100

70
EN
Getting to know your camera better
There is an error in the
internal memory.
Select [MEMORY FORMAT]
[YES] and
press
o
. All data in the internal memory is
erased.
NO CONNECTION
The camera is not
connected to the computer
or printer correctly.
Disconnect the camera and connect it
again correctly.
NO PAPER
There is no paper in the
printer.
Load some paper in the printer.
NO INK
The printer has run out of
ink.
Replace the ink cartridge in the printer.
JAMMED
The paper is jammed.
Remove the jammed paper.
SETTINGS
CHANGED
The printer’s paper tray has
been removed or the printer
has been operated while
changing settings on the
camera.
Do not operate the printer while changing
settings on the camera.
PRINT ERROR
There is a problem with the
printer and/or camera.
Turn off the camera and printer. Check the
printer and remedy any problems before
turning the power on again.
r
CANNOT PRINT
Pictures recorded on other
cameras may not be printed
on this camera.
Use a computer to print.
Monitor indication
Possible cause
Corrective action
OK
SET
MEMORY SETUP
POWER OFF
MEMORY FORMAT
[IN]