Onkyo TX-SR706 Owner Manual - Page 76
Setup, and then press [ENTER]., tons to select 2. Speaker
UPC - 751398008214
View all Onkyo TX-SR706 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Advanced Setup-Continued Speaker Distance 4 This setting is set automatically by the Automatic Speaker Setup function (see page 49). Here you can specify the distance from each speaker to the listening position so that the sound from each speaker arrives at the listener's ears as the sound designer intended. 2 5 3-7 3, 4 2, 8 1 Measure and make a note of the distance from each speaker to the listening position. 6 2 Press the [RECEIVER] button fol- lowed by the [SETUP] button. The main menu appears onscreen. If the main menu doesn't appear, make sure the appropriate external input is selected on your TV. Use the Up and Down [R]/[X] buttons to select "3. Speaker Distance", and then press [ENTER]. The "Speaker Distance" menu appears. 2-3. Speaker Distance Unit feet Left 12.0ft Center 12.0ft Right 12.0ft Surr Right 7.0ft Surr Back R 7.0ft Surr Back L 7.0ft Surr Left 7.0ft Subwoofer 12.0ft Use the Up and Down [R]/[X] buttons to select "Unit", and then use the Left and Right [F]/[S] buttons to select: feet: Select if you want to enter distances in feet. Can be set from 0.5 to 30 feet in 0.5-feet steps. meters: Select if you want to enter distances in meters. Can be set from 0.15 to 9 meters in 0.15-meter steps. Use the Up and Down [R]/[X] buttons to select "Left", and then use the Left and Right [F]/[S] buttons to specify the distance. Specify the distance from the front left speaker to your listening position. 3 76 Use the Up and Down [R]/[X] but- tons to select "2. Speaker Setup", and then press [ENTER]. The "Speaker Setup" menu appears. 7 2. Speaker Setup 1. Speaker Settings 2. Speaker Configuration 3. Speaker Distance 4. Level Calibration 5. Equalizer Settings 6. THX Audio Setup 8 Repeat step 6 for all speakers. Note: Speakers that you set to "No" or "None" on the Speaker Configuration page (page 73) cannot be selected. Press the [SETUP] button. The setup menu closes. Note: This procedure can also be performed on the AV receiver/AV amplifier by using its [SETUP] button, arrow buttons, and [ENTER] button.