Onkyo TX-SR706 Owner Manual - Page 79
tons to select Channel, and, that frequency.
UPC - 751398008214
View all Onkyo TX-SR706 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Advanced Setup-Continued 6 Use the Up and Down [R]/[X] but- tons to select a frequency, and then use the Left and Right [F]/ [S] buttons to adjust the level at that frequency. You can select: "63Hz", "160Hz", "400Hz", "1000Hz", "2500Hz", "6300Hz", or "16000Hz". And for the subwoofer, "25Hz", "40Hz", "63Hz", "100Hz", or "160Hz". The volume at each frequency can be adjusted from -6 to +6 dB in 1 dB steps. Tip: Low frequencies (e.g., 160Hz) affect bass sounds; high frequencies (e.g., 6300Hz) affect treble sounds. 7 Use the Up and Down [R]/[X] but- tons to select "Channel", and then use the Left and Right [F]/ [S] buttons to select another speaker. Repeat step 6 and 7 for each speaker. THX Audio Setup These settings are not set automatically by the Automatic Speaker Setup function (see page 49). With the "Surr Back Sp Spacing" setting, you can specify the distance between your surround back speakers. If you're using a THX-certified subwoofer, set the "THX Ultra2/Select2 Subwoofer" setting to "Yes". You can then apply THX's Boundary Gain Compensation (BGC) to compensate the perceived exaggeration of low frequencies for listeners sitting very close to a room boundary (i.e., wall). You can also set the THX Loudness Plus. When the "Loudness Plus" is set to "On", it is possible to enjoy even subtle nuances of audio expression at low volume. This result is only available when the THX listening mode is selected. 1 Remote controller Press the [RECEIVER] button, followed by the [SETUP] button. The main menu appears onscreen. If the main menu doesn't appear, make sure the appropriate external input is selected on your TV. 2 8 Press the [SETUP] button. The setup menu closes. Notes: • When the listening mode is set to Direct or Pure Audio, no effect will be produced. • The Equalizer settings have no effect on 176.4/ 192 3 kHz input signals. • This procedure can also be performed on the AV receiver/AV amplifier by using its [SETUP] button, arrow buttons, and [ENTER] button. Use the Up and Down [R]/[X] buttons to select "2. Speaker Setup", and then press [ENTER]. The "Speaker Setup" menu appears. 2. Speaker Setup 1. Speaker Settings 2. Speaker Configuration 3. Speaker Distance 4. Level Calibration 5. Equalizer Settings 6. THX Audio Setup Use the Up and Down [R]/[X] buttons to select "6. THX Audio Setup", and then press [ENTER]. The "THX Audio Setup" screen appears. 2-6. THX Audio Setup Surr Back Sp Spacing > 4ft THX Ultra2/Select2 Subwoofer No BGC - - - Loudness Plus On 79