Onkyo TX-SR706 Owner Manual - Page 91
Hardware Setup, Remote Control, Zone 2, Tuner TX-SR706 only
UPC - 751398008214
View all Onkyo TX-SR706 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Advanced Setup-Continued . Hardware Setup This section explains items on the "Hardware Setup" menu. 1 Remote controller Press the [RECEIVER] button followed by the [SETUP] button. The main menu appears onscreen. If the main menu doesn't appear, make sure the appropriate external input is selected on your TV. 2 Use the Up and Down [R]/[X] but- tons to select "7. Hardware Setup", and then press [ENTER]. The "Hardware Setup" menu appears. 7. Hardware Setup 1. Remote Control 2. Zone2 3. Tuner 4. Analog Multich 5. HDMI Note: This procedure can also be performed on the AV receiver/AV amplifier by using its [SETUP] button, arrow buttons, and [ENTER] button. Remote Control ■ Remote ID When several Onkyo components are used in the same room, their remote ID codes may overlap. To differentiate the AV receiver/AV amplifier from the other components, you can change its remote ID from 1, the default, to 2 or 3. Note: If you do change the AV receiver/AV amplifier's remote ID, be sure to change the remote controller to the same ID (see below), otherwise, you won't be able to control it with the remote controller. Changing the Remote Controller's ID 1 While holding down the [RECEIVER] button, press and hold down the [SETUP] button until the [RECEIVER] button lights up (about 3 seconds). Note: The "3. Tuner" (*) setting is not avail- (3 seconds) able on the TX-SA706. 2 Use the number buttons to enter 3 Use the Up and Down [R]/[X] but- tons to select an item, and then ID 1, 2, or 3. The [RECEIVER] button flashes twice. press [ENTER]. The screen for that item appears. Zone 2 See "Zone 2" on page 97. Tuner (TX-SR706 only) ■ AM Frequency Step (on some models) 4 Use the Up and Down [R]/[X] but- See "AM Frequency Step Setup (on some models)" on tons to select an item, and use page 47. the Left and Right [F]/[S] but- tons to change it. ■ SAT Radio Mode (on North American model) The items are explained below. If you connect an XM Satellite Radio antenna or SIRIUS Satellite Radio antenna to the AV receiver (both sold separately), set this setting to "XM" or "SIRIUS" respectively. If you connect both types of antenna, select 5 When you've finished, press the [SETUP] button. "XM/SIRIUS". Otherwise, select "None". See the separate Satellite Radio Guide for more information. The setup menu closes. ■ Antenna Aiming (on North American model) The ID of the Sirius Connect Home Tuner is displayed here. You must sign up to obtain a SIRIUS ID. See the separate Satellite Radio Guide for more information. 91