Onkyo TX-SR706 Owner Manual - Page 99
Using Zone 2, Controlling Zone 2 from the AV receiver/AV, amplifier
UPC - 751398008214
View all Onkyo TX-SR706 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Zone 2-Continued Using Zone 2 This section explains how to turn Zone 2 on and off, how to select an input source for Zone 2, and how to adjust the volume for Zone 2. Controlling Zone 2 from the AV receiver/AV amplifier Controlling Zone 2 with the Remote Controller ON/ STANDBY INPUT SELECTOR ZONE2 12 1 1 To turn on Zone 2 and select an input source, press the [ZONE 2] button repeatedly. Alternatively, press the [ZONE 2] button followed by an input selector button within 8 seconds. Zone 2 turns on, the ZONE 2 indicator lights up, and the 12V TRIGGER OUT ZONE 2 goes high (+12 V). To select AM or FM press the [TUNER] input selector button repeatedly (TX-SR706 only). On the North American model, you can also select XM or SIRIUS. To select the same source as that of the main room, press the [ZONE 2] button repeatedly until "Z2 Selector: Source" appears on the display. Note: You cannot select different AM or FM radio stations for your main room and Zone 2. The same AM/FM radio station will be heard in each room. 2 To turn off Zone 2, press the [OFF] button. Note: To control Zone 2, you must press the remote controller's [ZONE 2] button first. 1 Press the [ZONE 2] button, then point the remote controller at the AV receiver/AV amplifier and press the [ON/STANDBY] button. Zone 2 turns on, the ZONE 2 indicator lights up, and the 12V TRIGGER OUT ZONE 2 goes high (+12 V). 2 To select an input source for Zone 2, press the [ZONE 2] but- ton, followed by an INPUT SELECTOR button. To select AM or FM press the [TUNER] INPUT SELECTOR button repeatedly. On the North American model, you can also select XM or SIRIUS. Note: You cannot select different AM or FM radio stations for your main room and Zone 2. The same AM/FM radio station will be heard in each room. 3 To turn off Zone 2, press the [ZONE 2] button, followed by the [ON/STANDBY] button. Note: While Powered Zone 2 is being used, listening modes that require surround back speakers (6.1/7.1), such as Dolby Digital EX, DTS-ES, and THX Select2 Cinema, are unavailable. 99