Panasonic BT-LH1850 Operating Instruction - Page 11
Controls and Their Functions, Video monitor, Front panel
View all Panasonic BT-LH1850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Controls and Their Functions Video monitor Front panel 1 Rear panel 2 Front panel 3 (This page) 1 Tally Lamps (Red and Green) Can be lit by a control signal (red tally and green tally) from a GPI/camera. If the red tally and green tally light at the same time, the tally color will become amber. 2 Protective panel mounting screw holes (8 holes) Eight screw holes have been provided to enable attachment of a permanent protection panel. The screws for the protective panel are installed in the mounting screw holes at time of shipment. To attach a protective panel, first remove the screws before securing the panel. The LCD panel is shipped covered with a packaging material to protect it from damage during unpacking and transportation. Remove the panel before using the monitor. Front panel Rear panel (→page 12) Power supply (you can switch between AC and DC (→page 13)) 3 Tilt Stand The tilt stand allows you tilt the unit approx. 10 degrees forward or approx. 15 degrees backward. When tilting the unit, firmly hold the bottom of the stand and move the top of the unit. If you want to remove the tilt stand, refer to "Detaching and Attaching the Tilt Stand" (→page14). • When tilting the monitor, be careful not to trap your hand between the monitor and stand. HEADPHONES VIDEO SDI 1 SDI 2 HDMI DVI-I INPUT SELECT 1 2 3 4 5 FUNCTION MENU RETURN PICTURE VOLUME 5 61 2 1 POWER switch Switches the power supply ON/OFF. When the power is ON, the LED (green) lights. To turn the power off, press and hold the switch for at least three seconds. 2 INPUT SELECT button Selects the signal input line. The green LED light above the pressed button indicates the selected input signal. VIDEO : Video input SDI1 : S erial digital interface input (HD/SD compatible) SDI2 : S erial digital interface input (HD/SD compatible) HDMI : HDMI input (HDCP compatible) DVI-I : DVI-I input (HDCP compatible) • Selects one of four input signals: digital video or PC signal, analog video or PC signal. (→page 38) 3 4 • The input line when the power supply is switched ON is the one that was selected the last time the power was switched OFF. • When the control lock is on, the mark appears and input lines cannot be changed. (→page 41) • When INT-SG (internal chart for adjustment "Color Bar + Grayscale") is selected, all LEDs above the INPUT SE- LECT button are off. Use the "INPUT SELECT" menu to select INT-SG. (→page 18) 3 FUNCTION button FUNCTION1 to FUNCTION5: Press to use function assigned to the FUNCTION button with the menu. • When the control lock is on, the mark appears to indicate that FUNCTION operation is disabled. (→page 41) 11