Panasonic BT-LH1850 Operating Instruction - Page 40

Main menu (continued) DISPLAY SETUP The underlined values are factory preset setting values. Sub menu WFM/VECTOR POSITION VECTOR MODE VECTOR SCALE TIME CODE POSITION FONT SIZE MODE SELECT CLOSED CAPTION Settings OFF WFM Y WFM R WFM G WFM B VECTOR RT RB LB LT ×1 ×2S ×2 ×4 ×8 75% 100% OFF ON TOP RIGHT CENTER LEFT SMALL LARGE LTC VITC LUB VUB OFF ON Description Switches between "WFM/VECTOR" waveform and vector display. - Displays waveforms. Displays vector waveforms.*1 Selects the position for the "WFM/VECTOR" waveform display.*1 Right Top Right Bottom Left Bottom Left Top Enlarges vector waveforms.*1 1 × State in which displayed at scale of 1 x, and only waveforms enlarged to 2 x. 2 × 4 × 8 × Determines the scale of vector waveform. Displays it at 75 % scale. Displays it at 100 % scale. Turns the time code display on and off. Selects position of time code display. Top Center Bottom Right Bottom Center Bottom Left Selects font size of time code display. Menu font size Twice the height and width of menu font size Selects time code display mode. Displays linear time code (LTC). Displays vertical interval time code (VITC). Displays user bits included in LTC. Displays user bits included in VITC. Turns closed caption display on and off.*2 CC TYPE CEA-608 (ANC) CEA-608 (VBI) CEA-608 (708) CEA-708 OP-42 OP-47 Selects the closed caption display mode. Displays data compliant with CEA-608 (ANC). Displays data compliant with CEA-608 (VBI). Displays CEA-608 standard data transmitted according to the CEA-708 standard. Displays data compliant with CEA-708. Displays OP-42 data Displays OP-47 data CAPTION CHANNEL CC1 CC2 CC3 CC4 Selects the closed caption display channel for when CEA-608. CAPTION SERVICE SRV1 SRV2 SRV3 SRV4 SRV5 SRV6 Selects the closed caption display service for when CEA-708. *1 Opens the vector display during SDI signal input. *2 A bright line appears on line 21 when signal input is set to ON during video and underscan is enabled. 40