Panasonic BT-LH1850 Operating Instruction - Page 38

Main menu (continued) INPUT SELECT The underlined values are factory preset setting values. Sub menu VIDEO NTSC SETUP DVI-I Settings AUTO NTSC PAL 00 75 DIGITAL ANALOG Description Selects the VIDEO input format. *1 Automatically selects NTSC or PAL. NTSC PAL Selects NTSC setup level. Select this when the signal is at a 0 IRE setup level. Select this function when using 7.5 % setup signals. (The unit internally adjusts the 7.5 % setup level to suit the black level) Selects DVI-I input mode. Selects digital input. Selects analog input. DIGITAL ANALOG COMPONENT LEVEL AUTO VIDEO COMP. YPBPR RGB-COMP. SMPTE B75 B00 Selects a DVI-I digital input mode. Selects the input mode automatically depending on the input format. Selects component input. Selects PC input. Selects YPBPR (component) or RGB input mode when DVI-I is set to ANALOG. Selects YPBPR signals Selects the PC RGB signal. Selects the YPBPR (component) signal input level of DVI-I analog inputs. Signal level complies with SMPTE and PB and PR are 0.7 V [p-p] at 100 % chroma. Select this when connecting a Betacam or similar device with a setup function. (The unit internally adjusts the 7.5 % setup level to suit the black level) Select this when connecting a Betacam or similar device without a setup function. RGB-COMP. ▼ Performs analog PC settings. (This page) *1 "AUTO" is the factory default, but select an appropriate format when there is risk that the input signal may be contaminated by outside noise. „„RGB-COMP. Selecting "ANALOG." under "DVI-I" in the "INPUT SELECT" menu and selecting "RGB-COMP." under "ANALOG" opens the following menu. The underlined values are factory preset setting values. Sub menu H POSITION V POSITION PHASE CLOCK WXGA H SAMPLE Settings 0 to 60 (Factory default setting: 30) 0 to 15 (Factory default setting: 8) 0 to 31 (Factory default setting: 16) 700 to 1900 (Factory default setting*3) 1280 1366 Description Adjusts horizontal image display position in 2-clock units.*2 Adjusts vertical image display position.*2 Adjusts the clock phase in 1/32 clock period increments.*2 Adjusts the sampling clock in 2 clock units.*2 Select a WXGA format. Select a 1280 x 768 format. Select a 1366 x 768 format. RESET Returns H POSITION, V-POSITION, PHASE and CLOCK settings in the RGB-COMP. input compliant format to their factory defaults. *2 Each (compatible) input format can be adjusted but not when user data is loaded (→page27 "SETUP LOAD") or saved (→page27 "SETUP SAVE") *3 "CLOCK" factory default Format 640×480 (60 Hz) 800×600 (60 Hz) CLOCK 800 1056 Format 1280×768 (60 Hz) 1366×768 (60 Hz) CLOCK 1664 1792 1024×768 (60 Hz) 1344 38