Panasonic BT-LH1850 Operating Instruction - Page 19

How to Use the On Screen Menu (continued) Picture adjusting menu 1. Turn the rotary knob to select a menu item and press the rotary knob. • The menu closes and the set values of the selected menu item appears. [PICTURE] SETTING[USER2] PEAKING PHASE CHROMA BRIGHT CONTRAST BACKLIGHT F-IN-R MENU EXIT 2. Turn the rotary knob to select a set value and press the rotary knob. • The set value is confirmed and the menu reappears. • To cancel, press [RETURN] before pressing the rotary knob. [PHASE] 20 MENU EXIT RETURN RETURN [PHASE] 30 MENU EXIT RETURN RETURN Name Function Adjustable range ( ): Factory default PEAKING PEAKING 0 to 30 (0) PHASE PHASE 0 to 60 (30) CHROMA CHROMA 0 to 60 (30) BRIGHT BRIGHT 0 to 60 (30) CONTRAST CONTRAST 0 to 60 (50) BACKLIGHT BACKLIGHT 0 to 100 (80) F-IN-R FOCUS-IN-RED 0 to 30 (30) The text color of set values that are factory defaults is green and other values are white. Set values are loaded when the monitor is turned on. However, operations and changes cannot be made in the following conditions. • When the control lock is on, the key mark ( ) appears and set values cannot be changed. (→page 41) • When the MONO function is ON, [PHASE] and [CHROMA] operations are disabled. (→page 26) • F-IN-R is enabled during operation of the FOCUS-IN-RED function. • While operating HV DELAY (→page 30) (when set to any other setting than OFF), [BRIGHT] operation is disabled. • The "CONTRAST" and "BACK LIGHT" operations are disabled in BLACK MODE. [PICTURE] SETTING[USER2] PEAKING PHASE * CHROMA BRIGHT CONTRAST BACKLIGHT F-IN-R MENU EXIT • A mark (*) appears beside menu names whose picture adjustments (PEAKING/CHROMA/PHASE/BRIGHT/ CONTRAST/BACKLIGHT) have been changed from the values assigned using "SETUP LOAD" or "POWER ON SETUP". Audio volume • For details on how to display the audio volume, refer to "Audio volume display" (→page15) 1. Turn the rotary knob to select a set value. [VOLUME] 30 MENU EXIT • Set value is confirmed when it is changed. • Changing the audio volume when audio output is muted ("AU- DIO MUTE" (→page30)) immediately cancels AUDIO MUTE. • is displayed when audio output of the monitor is muted. • Audio volume is always available and is not affected by the "CONTROL" menu (→page 41) • The adjustment range is 0 to 60 (the factory default is 0) 19