Panasonic BT-LH1850 Operating Instruction - Page 41
Control, Hours Meter, Rs-485 Stx&etx
View all Panasonic BT-LH1850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Main menu (continued) Sub menu Settings Description IN MONITOR DISPLAY OFF ON Enables IMD display. POSITION TOP BOTTOM Selects the position for the IMD display. Top Bottom CHAR. COLOR CMD WHITE BLUE GREEN YELLOW CYAN RED GRAY MAGENTA Selects IMD font color. Color specified by command*3 White Blue Green Yellow Cyan Red Gray Magenta *3 When colors selected by commands are set to "OFF," the IMD character string is not displayed. CONTROL The underlined values are factory preset setting values. Sub menu CONTROL Settings LOCAL REMOTE Description Selects operation. (with control lock) Front panel operation is enabled (including controls that use the GPI function) Remote operation enabled (controls using RS-232C or RS-485). (Front panel operation is locked) • Power On/Off, VOLUME operations, GPI control and menu display are available when the lock is engaged. • Only "CONTROL/LOCAL ENABLE" menu items are available when the lock is engaged. • The rotary knob is disabled and set values cannot be changed when the lock is engaged. • The "LOCAL ENABLE" setting determines operations in lock mode. • The key icon appears in the operation status display, menu display (main menu, FUNCTION menu, INPUT SELECT menu), picture adjustment menu display, and function display screens when the lock is engaged. LOCAL ENABLE *1 DISABLE INPUT FUNCTION INPUT+FUNC. PROTOCOL VER. *2 RS-485 ID SETUP RS-485 STX&ETX V3.1 V4.0 0-126 OFF ON [MARKER] MARKER OFF Key icon 16:9 4:3 4:3 OFF Selects whether toBCeAEnCNaKTbElRe or disable INNPORUMOTAFLFSELECT and FUNCTION button operations when "RCREOMSOS TE" is selected unOdFeFr "CONTROL." G CPOIDLisOMaRAbRlKeEsRI1NPUT95S%E(LW1EH6I:CT9TE)and FUNCTION button operations. G PIEnMaAbRleKsERIN2PUT95S%E(L1E6C:9T)button operations. M ENUEEnXIaTbles SFELU. NCETNTIEOR NREbTURuN tRtEoTUnRN operations. Enables INPUT SELECT and FUNCTION button operations. Selects version of the TSL protocol. Sets the unit ID number to use in RS-485 communication. Select RS-485 interface command format (→page 46). STX and ETX need not be placed. STX and ETX must be placed. *1 Only available when "REMOTE" is selected under "CONTROL." *2 The monitor supports version 3.1 and 4.0 of the TSL UMD PROTOCOL provided by Television System LTD. HOURS METER Sub menu Settings Description OPERATION XXXXXXh *1 Displays the number of hours it has been on. LCD XXXXXXh *1 Displays the number of hours that the backlight has been on. *1 "XXXXXX" indicates up to 262800 hours (approx. 30 years). "OVER" is indicated when the number of hours is 262800 or higher. 41