Panasonic DMRE500 DMRE500 User Guide - Page 72
ERROR MESSAGES, On the television, On the unit's display
View all Panasonic DMRE500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Error messages On the television Cannot finish recording completely. Cannot play. Cannot record on the disc. Please check the disc. Unable to format. Cannot play back on this DVDRecorder. Cannot record. Disc is full. Cannot record. Maximum number of titles exceeded. Error has occurred. Please press ENTER. No disc No folders. No PC CARD No SD CARD No valid PC card. No valid SD card. Not enough space on dubbing destination. ≥The program was copy-protected. ≥The HDD or disc may be full. ≥You inserted an incompatible disc (Discs recorded in PAL video, etc.). ≥The disc may be dirty or scratched. ≥You cannot format a Microdrive or mobile hard disk on this unit. ≥You tried to play a non-compatible image. ≥Turn the unit off and re-insert the card. ≥Create space by erasing any unnecessary titles. [HDD] [RAM] (Even if you erase recorded content from the DVD-R, there is no increase in disc space.) ≥Use a new disc. ≥Press [ENTER] to start recovery process. You cannot operate the unit while it is recovering ("SELF CHECK" appears on the unit's display). ≥The disc may be upside down. ≥There is no compatible folder in this unit. ≥The card is not inserted. If this message is displayed with a compatible card already inserted, turn off the unit, remove and then re-insert the card. ≥The card inserted is not compatible or the card format does not match. ≥Create space by erasing any unnecessary items. Please change the disc. This is a non-recordable disc. This disc is not formatted properly. $ Cannot connect to the network. No file. No title. ≥Erase one or more items registered on the transfer (dubbing) list to ensure that the "Current capacity" is not exceeded. ≥There may be a problem with the disc. Press [< OPEN/CLOSE] on the main unit to remove it and check it for scratches or dirt. (The unit turns off automatically after you open the tray.) ≥The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized DVD-R. ≥You inserted an unformatted DVD-RAM. Format the disc with this unit. ≥The operation is prohibited by the unit or disc. ≥The router etc. is not properly connected. Please check the LAN cable connection and router's AC power supply cord and setting (DHCP server setting etc.). ≥Make sure the MPEG4 or still pictures have been recorded. To record MPEG4 titles on the HDD, set "MPEG4 Recording Mode" in the SETUP menu to "XF", "SF", "F", "N" or "E". On the unit's display CHK REMOTE ("∑" stands for a number.) ≥The remote control and main unit are using different codes. Change the code on the remote control. Press and hold [ENTER] and the indicated number button at the same time for more than 2 seconds. Page - - - 79 - 34 34 32, 37, 41, 45, 59 - - - 21 34 21 32, 35, 37, 41, 44, 45, 59 49, 55 79 - 59 - 10, 11 34, 36 62 14 HARD ERR HDD SLP NO READ PLEASE WAIT SELF CHECK UNSUPPORT U14 U99 ≥If there is no change after turning the unit on and off, consult the dealer where the unit was - purchased. ≥In order to extend HDD life, the HDD is in SLEEP mode. Press [HDD] to activate. 79 ≥The disc is dirty or badly scratched. The unit cannot record, play, or edit. 79 ≥You have used a DVD-RAM/PD lens cleaner and it has finished. Press [< OPEN/CLOSE] - on the main unit to eject the disc. ≥Displayed when the unit is started. This is not a malfunction. - ≥There was a power failure or the AC plug was disconnected while the unit was on. The unit - is carrying out its recovery process. Wait until the message disappears. ≥You have inserted a disc the unit cannot play or record on. 20 ≥The unit is hot. - The unit switches to standby for safety reasons. Wait for about 30 minutes until the message disappears. Select a position with good ventilation when installing the unit. Do not block the cooling fan on the rear of the unit. ≥The unit fails to operate properly. Press [POWER Í/I] on the main unit to switch the unit to - standby. Now press [POWER Í/I] on the main unit again to turn the unit on. Reference RQT7394 72