Panasonic DMRE500 DMRE500 User Guide - Page 75

Reference Recording/Timer recording/Transferring (dubbing) (Continued) Cannot transfer (dub) to a DVD- ≥When recording to the HDD, set "DVD-R High-Speed Recording" to "On" in the SETUP R disc using the high speed menu. mode. When transferring (dubbing), it takes a long time even when high speed mode is selected. ≥Use a disc that is compatible with high speed recording. Even if the disc is high speed recording compatible, the maximum speed recording rating may not be possible due to the condition of the disc. ≥It takes longer than normal to transfer (dub) many titles. ≥You cannot high speed transfer (dub) to DVD-R titles longer than 6 hours when using other Panasonic DVD recorders that are not compatible with EP (8 hour) mode recording. An unusually loud sound coming from the rotating DVD-R. ≥When recording or high speed transferring (dubbing) to a DVD-R, the sound of the disc rotating may be louder than normal; however, this is not a problem. The DV automatic recording function does not work. ≥If images cannot be recorded or if the recording is aborted, check the connections and DV equipment settings. ≥You cannot start recording until the images from the DV equipment appear on the television. ≥Recording may not be performed as desired if the time codes on the tape in the DV equipment are not successive. ≥Depending on the equipment, the DV automatic recording may not operate properly. Page 62 - - - - 51, 52 - - - TV Guide On ScreenTM system Although initial setup for the ≥Leave the unit turned off for at least 24 hours. - TV Guide On ScreenTM system ≥Initial setup was done incorrectly. (e.g, The user entered the wrong country, ZIP/postal code 29 was completed hours ago, or cable TV box information.) Select "Change system settings" menu and verify the data television program list does entered during initial setup. If the settings are wrong, set up the TV Guide On ScreenTM not display when [TV GUIDE] is system again. pressed. ≥Check the connection and set up the TV Guide On ScreenTM system again. 29 If you connect a cable TV box -the output terminal of the cable TV box is connected to this unit's RF IN or IN3 (L3) terminal 8 -the IR Blaster is correctly connected and installed 8 -the cable TV box is turned on - If you do not connect a cable TV box -the antenna cable is connected to this unit's RF IN terminal 7 ≥The television program list was temporarily unavailable in your area (Wait another 24 hours - or Re-do setup). ≥The television program list is not available in your area. Set the unit using "Auto Channel 65 Setting". Note that you can only manually set timer recording after you set the unit using "Auto Channel Setting". ≥Consult your service provider if you are using a cable TV box. - "Cable code -INCOMPLETE-" ≥The unit cannot find the correct IR code for the cable TV box. Consult your service provider. - appears in the TV Guide On ScreenTM system setup. As soon as the unit is turned ≥Even if you do not want to use the TV Guide On ScreenTM system, you need to complete the 12 on, and when you try to start TV Guide On ScreenTM system setup (until you have to press [ENTER] after the "Watch TV" timer recording, the TV Guide message screen is displayed). It will not be displayed after this point. On ScreenTM system setup begins. Some or all of the channels ≥For a newly installed unit, the TV Guide On ScreenTM system may not have been given - display "No Listing" enough time to download the initial data. This procedure can only occur when the unit is in standby mode for a period of 24 hours. (During this time, do not turn on the unit as the download will be interrupted.) Once the procedure takes place the phrase "No Listing" will be replaced with program information. ≥The channel(s) in question was (were) recently turned "ON" (in the CHANNEL EDITOR - screen) however TV Guide On ScreenTM system has yet to receive channel data for this channel. Leave the unit in standby mode. ≥Immediately after beginning use there are several days of blank listings. You can display the - television program list for up to the next 8 days forward without any blank listings by downloading program lists continuously over several days. ≥The unit was left turned on for an extended period of time and the TV Guide On ScreenTM - system was unable to receive television program list data. Press [Í DVD POWER] to set the unit in standby mode when not in use. ≥During the data download the station from which data is downloaded had an unscheduled - power outage. ≥If using an off-air antenna, marginally poor reception can cause some of the data to be - missed. ≥If using a cable TV box, it was accidentally turned off. In installations using a cable TV box, - the box must be left on continuously. Continued on next page RQT7394 75