Panasonic KX-TG2730S 2.4 Ghz Cordles Phon - Page 58

2-Way Radio Communication (When the System Has Additional Handsets) If you purchase one or more additional handsets (p. 26), you can use this feature (except for KX-TGA272S). A handset user can talk with another handset user regardless of the base unit location. 2-Way Radio communication, which is the direct communication between a pair of handsets, does not need the base unit interface. You need to turn the mode on on the handsets. Once the mode is on, the handset can be used only to talk with another handset, and the following features cannot be used on the handset: - Making/answering external and internal calls - Searching the Caller List or directory - Programming - Accessing mailboxes to listen to messages - Receiving Caller ID information After finish using this mode, remember to turn the mode off. Otherwise the battery operating time will be shortened (p. 13). To turn the 2-Way Radio mode on Make sure the handset is not being used. 1 Press (CONF/FUNCTION). 2 Scroll to "2Way radio mode" by pressing Ö or Ñ. 3 Press á. 4 Select "On" by pressing Ö or Ñ. 5 Press the right soft key ( SAVE ). •A beep sounds and the mode will turn on. Initial setting H2Way radio mode 2Way radio mode :Off GF SAVE 2Way radio mode :On GF SAVE 2Way radio mode •You can exit the programming mode any time by pressing (OFF). To turn the mode off: Place the handset on the base unit or the charger. •You can also turn the mode off by performing the three procedures: (1) press (CONF/FUNCTION), (2) select "Off" by pressing Ö or Ñ, and (3) press the right soft key ( SAVE ). •"2Way radio mode" will disappear and the mode will turn off. 58