Panasonic KX-TG2730S 2.4 Ghz Cordles Phon - Page 65

Setting the Mailbox Password (for Mailbox 2 and 3) You can use Mailbox 2 or 3 for your personal mailbox, and prevent unauthorized people from accessing the mailbox and listening to the messages. Assign 2-digit password (00-99) to Mailbox 2 or 3. Each password and the remote code (p. 75) must be unique. Once the password is assigned to Mailbox 2 or 3, no one can access the mailbox to listen to messages without entering the password. Make sure the base unit and the handset are not being used. 1 Press (CONF/FUNCTION), and scroll to "Initial setting" by pressing Ö or Ñ, and press á. Copy directory HInitial setting 2Way radio mode 2 Scroll to "Set answering" by pressing Ö or Ñ, and press á. Set tel line HSet answering Set base unit 3 Scroll to "Set mailbox2&3" by pressing Ö or Ñ. 4 Press á. Remote code HSet mailbox2&3 Set password F=Mailbox2 G=Mailbox3 5 Select the mailbox by pressing Ñ (Mailbox 2) or Ö (Mailbox 3). •If the password has already been assigned to the mailbox, it is displayed. Set password Mailbox2 :-- SAVE 6 Enter a password using a 2-digit number (00-99). Set password Mailbox2 :22 •If you entered a wrong number, press (HOLD/CLEAR) and enter the password again. SAVE 7 Press the right soft key ( SAVE ). •A beep sounds. •If 3 beeps sound, you entered the same password as the other mailbox or the remote code (p. 75) or the entered password was one-digit. Start again from step 6 and select another password. •To exit the programming mode, press (OFF). To check the password: Repeat steps 1 to 5. •The password is displayed. When finished, press (OFF). To erase the password Press (HOLD/CLEAR) in step 6, and press the right soft key ( SAVE ). •You will be able to access the mailbox without entering the password. Answering System For assistance, please call: 1-800-211-PANA(7262) 65