Panasonic KX-TG2730S 2.4 Ghz Cordles Phon - Page 93

Problem Cause & Remedy You cannot register the handset at the base unit. •Charge the battery fully (p. 12). •The maximum of 8 handsets have already been registered to the base unit. •This base unit has the memory of the handset currently registered to another base unit. Erase the handset memory from the base unit, see the base unit Operating Instructions. For KX-TG2730S base unit: (1) Press (PROGRAM), (2) Press (MUTE), (3) Enter "335#" and (4) Enter that handset number (1 to 8). "Recharge battery" is displayed, " " flashes or the handset beeps intermittently. •Charge the battery fully (p. 13). "Charge for 15HRS" and •The battery has been discharged. Charge the " " are displayed and battery fully (p. 13). the handset does not work. You charged the battery fully, but "Recharge battery" is still displayed and/or " " continues to flash, or "Charge for 15HRS" and " " are displayed. •Clean the charge contacts and charge again (p. 13). •Install a new battery (p. 83). The CHARGE indicator light does not go out after the battery has been charged. •This is normal. If you cannot solve your problem •Call our customer call center at 1-800-211-PANA(7262). •Panasonic's e-mail address for customer inquiries: [email protected] for customers in the USA or Puerto Rico ONLY Useful Information For assistance, please call: 1-800-211-PANA(7262) 93