Panasonic KX-TG2730S 2.4 Ghz Cordles Phon - Page 85

Re-registering the Handset If you want to re-register the handset to the base unit or a different base unit of the same model, you need to register it to that base unit. The handset will be given a new extension number of that base unit. Only one handset can be registered at a time. Make sure the base unit and the other handsets are not being used. Registration must be completed within 1 minute. If you have canceled the handset registration at the previous base unit (p. 84), start from step 5. 1 Handset: Press (CONF/FUNCTION). 2 Scroll to "Initial setting" by pressing Ö or Ñ, and press á. 3 Scroll to "Registration" by pressing Ö or Ñ, and press á. 4 Press á at "HS registration". 5 Base unit: Press (MUTE). •The MUTE indicator light flashes. 6 Handset: #Press the right soft key ( OK ). $Wait until a long beep sounds and the display shows the registered number. The registration will be then complete. •The registered number "[1]" to "[8]" is shown on the top right of the display. •You can stop registration by pressing (OFF) on the handset and pressing (MUTE) on the base unit. Copy directory HInitial setting 2Way radio mode Set base unit HRegistration HHS registration Deregistration Press MUTE on base unit, then OK on handset to register handset OK SP PRIVACY [-] Handset ReRegistering Ex. Extension number 2 SP PRIVACY [2] Handset [2] RegRegistered Useful Information If you have not canceled the handset registration at the previous base unit (p. 84), the handset number still remains on that base unit memory. To erase the handset number from the previous base unit, see the base unit Operating Instructions. For KX-TG2730S base unit: (1) press (PROGRAM), (2) press (MUTE), (3) enter "335#", and (4) enter that handset number ((1) to (8)). For assistance, please call: 1-800-211-PANA(7262) 85