Panasonic KX-TG2730S 2.4 Ghz Cordles Phon - Page 63

Incoming Call Tone During an intercom call (p. 49) or while using the Room Monitor feature (p. 56) or while listening to messages (p. 67, 71), you can be informed by two tones if a call arrives. If you set to ON, this incoming call tone will be heard for as long as the line rings. To delete the incoming call tone, set to OFF. To set the incoming call tone to sound twice, set to "2". Both the handset and base unit are preset to "2". Handset incoming call tone Make sure the handset is not being used. Cordless Telephone 1 Press (CONF/FUNCTION). 2 Scroll to "Ringer setting" by pressing Ö or Ñ, and press á. 3 Scroll to "Incoming call" by pressing Ö or Ñ, and press á. •The current setting will be displayed. 4 Select the desired setting, "On", "Off" or "2", by pressing Ö or Ñ. 5 Press the right soft key ( SAVE ). •A beep sounds. •To exit the programming mode, press (OFF). Save directory HRinger setting Date and time Ringer tone HIncoming call Incoming call to Incomin ne :2 GF SAVE Base unit incoming call tone Use the handset. Make sure the base unit and the handset are not being used. 1 Press (CONF/FUNCTION), and scroll to "Initial setting" by pressing Ö or Ñ, and press á. 2 Scroll to "Set base unit" by pressing Ö or Ñ, and press á. Set answering HSet base unit Registration 3 Press á at "Incoming call". •The current setting will be displayed. HIncoming call Room monitor 4 Select the desired setting, "On", "Off" or "2", by pressing Ö or Ñ. 5 Press the right soft key ( SAVE ). •A beep sounds. •To exit the programming mode, press (OFF). Incoming call to Incomin ne :2 GF SAVE For assistance, please call: 1-800-211-PANA(7262) 63