Panasonic KX-TG2730S 2.4 Ghz Cordles Phon - Page 92

Troubleshooting Problem Cause & Remedy You cannot erase messages in the mailbox. •While another user is accessing the mailbox or a caller is leaving a message in the mailbox, you cannot erase messages in the same mailbox. When you play back messages or you turn the Answering system on, the unit announces the wrong day. •The date may be set wrong. Adjust the date (p. 21). Caller ID information does not display during message playback (p. 72). •The caller information will not be displayed •- if a message is recorded by using (MEMO) (p. 69), •- if a call is transferred to a mailbox, and the caller leaves a message (p. 70), or •- if the Caller List is renewed and the caller information is erased (p. 34). General Problem Cause & Remedy The unit does not work. You cannot program items, such as the dialing mode. 92 •Check the settings (p. 11-13). •Check whether the dialing mode setting is correct (p. 16). •Charge the battery fully (p. 12). •Clean the charge contacts and charge again (p. 13). •Install the battery properly (p. 12). •Unplug the AC adaptor to reset. Plug in, and try again. •The handset has not been registered to the base unit. Register the handset (p. 26, 85). •Re-install the battery (p. 83) and charge it fully. •Programming is not possible while the handset is being used. •Do not pause for over 60 seconds while programming. •Walk closer to the base unit or á may have been pressed when you picked up the handset. Press (OFF) and try again. •If more than three other users are using the handsets, you may not be able to program. Try again later. •If the 2-Way Radio mode is on, turn it off (p. 58).