Panasonic KX-TG2730S 2.4 Ghz Cordles Phon - Page 61

How to Use the PAUSE Button (For PBX Line/Long Distance Calls) We recommend you press (PAUSE/REDIAL) on the handset or (REDIAL/PAUSE) on the base unit if a pause is required for dialing with a PBX or to make a long distance call. Ex. Line access number (9) (PBX) (9) \ (PAUSE/REDIAL) or (REDIAL/PAUSE) \ Phone number •Pressing (PAUSE/REDIAL) or (REDIAL/PAUSE) once creates a 3.5 second pause. This prevents misdialing when you redial or dial a stored number. •Pressing (PAUSE/REDIAL) or (REDIAL/PAUSE) more than once increases the length of the pause between numbers. Cordless Telephone FLASH Button Pressing (FLASH/CALL!WAIT) also allows you to use special features of your host PBX such as transferring an extension call or accessing special telephone services (optional) such as call waiting. •Pressing (FLASH/CALL!WAIT) causes to disable the Temporary Tone Dialing mode or the mute (p. 60). Selecting the flash time The flash time depends on your telephone exchange or host PBX. You can select the following flash times: "700, 600, 400, 300, 250, 110, 100 or 90 ms (milliseconds)". Your phone comes from the factory set to "700 ms". Make sure the base unit and the handset are not being used. 1 Press (CONF/FUNCTION), and scroll to "Initial setting" by pressing Ö or Ñ, and press á. 2 Scroll to "Set tel line" by pressing Ö or Ñ, and press á. 3 Scroll to "Set flash time" by pressing Ö or Ñ, and press á. •The current setting is displayed. Caller ID edit HSet tel line Set answering Set dial mode HSet flash time Set line mode 4 Select the desired time by pressing Ö or Ñ. 5 Press the right soft key ( SAVE ). •A beep sounds. •To exit the programming mode, press (OFF). Set flash time :700ms GF SAVE •If the unit is connected via a PBX, PBX functions (transferring a call etc.) might not work correctly. Consult your PBX supplier for the correct setting. For assistance, please call: 1-800-211-PANA(7262) 61