Panasonic PVDV73D PVDV73 User Guide - Page 15

Before Use Supplying Power Battery Care Caution: • Charge only with specified charger. • Charge the Battery within an ambient temperature range of 10 °C (50 °F) and 30 °C (86 °F). • The Battery may be warm after charging or just after use. This is normal. • Do not use an insufficiently charged or worn out Battery. • If charging is done in extreme low or high temperatures, Battery charge time increases. Safety precautions: • Do not place the Battery near, or dispose of in fire. • Do not directly connect (short circuit) the positive (+) and negative (-) terminals. • Never attempt to disassemble or reassemble the Battery. To avoid damage to the Battery: • Do not drop or jar the Battery. • Use the Battery with specified models only. • If the Battery is used in extremely high temperatures, a safety device will automatically prevent operation. To ensure longer battery life: • While not in use, remove Battery from the Palmcorder and AC Adaptor and store in a cool, dark, dry place. If you leave the Battery in the Palmcorder or on the AC Adaptor, the Battery will no longer be rechargeable. • Keep the Battery terminals clean. U.S.A. CONSUMERS: ATTENTION: A lithium ion/polymer battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. Use AC Adaptor 3 2 1 Slide the Battery downward while 1 sliding BATT RELEASE to remove the 2 Battery Pack. (p. 14) Insert the DC Cable into the DC IN 3 BATT RELEASE Terminal. Connect the other end of the DC 4 Cable to the AC Adaptor as shown. Plug in the AC Adaptor. DC IN Terminal • The POWER Lamp on the AC Adaptor lights up. 3 1 DC Cable (Supplied) POWER Lamp Note • When not in use, unplug the AC Adaptor from the AC outlet. (AC Adaptor consumes 1 W of electric power when plugged into an AC outlet even when not in use.) 2 DC Output Connector 15