Panasonic PVGS36 PVGS36 User Guide - Page 31

Recording Mode Notes: • The larger the digital zoom magnification, the more the image quality is degraded. • When the Card Recording mode is used, the Digital Zoom Function cannot be used. • White Balance cannot be set in the Digital Zoom range. About the Variable Speed Zoom Function • When pushing the [W/T] Lever as far as it will go, you can zoom from 1× to 30× in 3.3 seconds at the maximum in the Recording Mode. • The zoom speed varies according to the amount of movement of the [W/T] Lever. Image Stabilizer Function If the Camcorder is shaken while recording, the camera shake in the image can be corrected. • If the Camcorder shakes too much, the images may not be stabilized. • Set to Tape Recording Mode. 1 Set [ ADVANCED] >> [ EIS] >> [ON]. • The [ ] Indication appears. SP 3h59m59s29f R 2:00 Notes: • When the MagicPix Function is used, the image stabilizer function does not work. If so, the [ ] indication flashes. • When the Gain Up mode is set to ON, the image stabilizer function does not work. If so, the [ ] indication flashes. • Under fluorescent lighting, image brightness may change or colors may not look natural. • After-images may appear. • When a tripod is used, we recommend that you turn the Image Stabilizer off. • In the following cases, the Image Stabilizer Function may not work effectively. - When the digital zoom is used - When a conversion lens is used - When recording is done in an extremely dark place - When the Camcorder is shaken greatly - When you record a moving subject while tracking it Fade In/Out Functions • Fade In : The image and audio gradually appear. • Fade Out : The image and audio gradually disappear. • Set to Tape Recording Mode. 1 Press the Joystick Control to display the One-Touch Navigation icon on the lower right of the screen. 2 Move the Joystick Control [▼] until the page with [ ] indication is displayed. [One-Touch Navigation icon] 12:34:56AM JAN 2 2006 100 2 Press the Recording Start/Stop Button or [PHOTO SHOT] Button to start recording. „ To Cancel the Image Stabilizer Function Set [ ADVANCED] >> [ EIS] >> [OFF]. 1/4 NEXT 3 Move the Joystick Control [◄] to select [ ]. • The [FADE ON] is displayed. • The [ W] or [ B] Indication flashes and then is displayed. 4 Press the Recording Start/Stop Button. 31