Panasonic PVGS36 PVGS36 User Guide - Page 46
Recording From A Tape Onto A Card, Pc Connection With Dv Interface Cable, To Stop Dubbing
View all Panasonic PVGS36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
To Cancel the Standby for Recording When the Camcorder is on standby for recording, move the Joystick Control [▼] and select the [ ]. To Stop Dubbing Move the Joystick Control [▲] to select [ ] again. CAUTION: Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement. Notes: • Do not plug or unplug the DV Cable during dubbing, or the dubbing may not be completed properly. • If a picture (bilingual video, etc.) containing main sound and sub sound has been dubbed, select the desired sound by [ SETUP] >> [ AUDIO OUT] on playback. • Regardless of the menu settings on the recorder, digital dubbing is carried out in the same mode as the [ AUDIO REC] mode of the playback tape. • The images on the recorder monitor may be disturbed, but it does not affect the recorded images. • Even if you use a device equipped with DV Terminals such as IEEE1394, you may not be able to perform Digital Dubbing in some cases. For more information, see the instructions for equipment connected. • Date or other information to be displayed cannot be displayed if the software of the connected equipment does not support the display function. • While pictures are input from the DV terminal, the One-Touch Navigation icon blinks on instead of appearing from the side of the screen when you press the center of the Joystick Control. Recording from a Tape onto a Card Still pictures can be recorded on the Memory Card from scenes that have already been recorded on a cassette. 1 Set the Mode Dial to Tape Playback Mode. • The One-Touch Navigation icon is displayed on the lower right of the screen. [One-Touch Navigation icon] 3 Move the Joystick Control [▲] to start playback and set the Camcorder to Still Playback Mode at the scene you wish to record, and press the [PHOTO SHOT] Button. • Audio will not be recorded. Note: • If you press the [PHOTO SHOT] Button without pausing, blurred pictures may be recorded. PC Connection With DV Interface Cable A video clip can be transferred directly to your PC (Personal Computer) via a DV Interface Cable (Optional) using products and software from a number of video editing software companies. Using products from video editing software companies allows you to capture and edit video clips using the DV Interface. Our DVC being OHCI compliant should have no problem working with any OHCI compliant Firewire Card/video - Editing software package. • Personal Computer must be equipped with an DV Terminal. • During Camcorder playback, do not disconnect the DV Interface Cable or turn the Camcorder off as this may cause a PC hang-up error. • 1394 (i.LINK) Interface must conform to OHCI (Open Host Controller Interface Specification). 2 Insert a tape which already has recorded contents and a card. 46 For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo