Panasonic WJ-HDE400/3000T3 Installation Guide
Panasonic WJ-HDE400/3000T3 Manual
 |
View all Panasonic WJ-HDE400/3000T3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Panasonic WJ-HDE400/3000T3 manual content summary:
- Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 1
Installation Guide Extension Unit Model No. WJ-HDE400 WJ-HDE400/G 1 2 3 4 5 6 7 8 9 Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. The model number is abbreviated in some descriptions in this manual. - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 2
. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Power disconnection. Unit with or without ON-OFF switches have power supplied to the unit - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 3
if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of , DUE TO ANY REASON OR CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT; (5) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT OF - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 4
block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 5
Important safety instructions...4 Preface...6 Features...6 HDD fault-tolerance system...6 Easy replacement of HDDs...6 About the user manuals...6 Precautions...7 )...30 ● Replacement of a faulty hard disk drive in the RAID mode 31 Troubleshooting...32 Specifications...35 Standard accessories...35 5 - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 6
purchasing/replacing the hard disk drives. About the user manuals This installation guide contains descriptions of how to install/connect this product, the manuals provided with the recorder. "WJ-HDE400" or "HDE400" shown in the instructions and illustrations used in these operating instructions - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 7
replace them after around 18 000 hours of operation to prevent data loss from disk failures. • When hard disk drive trouble occurs, replace it immediately. Contact your dealer about servicing. Prevent condensation from forming on the surface of the hard disk drive. If this happens, do not turn on - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 8
Precautions for installation Use this product for indoor use only. Avoid the following locations for installation. • Places exposed to direct sunlight • Places subject to having strong vibration or impact • Near magnetic field sources such as a television or speakers • Place where condensation - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 9
(HDD1 - HDD9). Important: • When the indicator lights red in the RAID 5 mode, replace the respective hard disk drive immediately. Contact your dealer about servicing. In the RAID 5 mode: When 2 or more HDD access indica- tors light/blink red, it may be impossible to recover data on the respective - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 10
e Key hole Use the provided key to open/close the front cover. Keep the key in a safe place. Lock the front cover: Insert, push and turn the key to the left. Unlock the front cover: Insert, push and turn the key to the right. r Error indicator (ERROR) Blinks red when an error occurs that may - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 11
■ Inside the front cover qw e r t q HDD units Only the hard disk drive encased in the dedicated hard disk drive canister (HDD units) can be installed in the extension unit. When using a network disk recorder, it is possible to add/ replace the HDD unit by operating the buttons on the front - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 12
■ Rear view ty t q we r q External input connector (EXT IN) Use this connector to connect to the recorder using the provided connection cable. w Signal ground terminal (SIGNAL GND) Connect this terminal with the SIGNAL GND terminals of the devices in the system for signal ground. When - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 13
● Cable clamp Fix the connection cable using the provided cable clamp as follows. 1 Attach the cable clamp fixing belt to the fixing hole on the rear, and pass the cable through the holder part of the cable clamp. Pull the cable clamp fixing belt to confirm that the fixing belt is attached firmly - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 14
on the hard disk drives, display the disk configuration menu from the setup menu and format the hard disk drives. Refer to the manuals provided with the recorder for further information. ➡ n Start operation When necessary m Replacement of the hard disk drives When using a network disk recorder - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 15
Install the extension unit in a rack Install the extension unit in an EIA standard 19-inch rack (Depth: 550 mm or more). Note: • Use four M5 x 12 screws (locally procured) to install the extension unit in a rack. ■ Installation procedure 1 Remove the five rubber feet from the bottom of the - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 16
far, it may cause malfunction. Do not wind the cable in a coil. • The unit numbers are only for the above connection example. Refer to the manuals provided with the recorder for how to check the unit numbers of the connected extension units. 16 - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 17
recorder. The number of extension units that are connectable varies depending on the models of the recorders to be used. Refer to the manuals provided with the recorder. Connect the extension unit and the recorder using the provided connection cable (1 m {39.4"}). When connecting an extension unit - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 18
power of the extension unit Turn off the power of the extension unit after turning off the power of the recorder. Refer also to the manuals provided with the recorder. 1 Stop recording on the recorder. • Stop all recordings on the network disk recorder. • Stop all playbacks. 2 Turn off the power of - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 19
panel ■ Operational mode display (standby display) The current operational mode and the internal temperature will be displayed on the LCD. Refer to the manuals provided with the recorder for information on how to display the disk configuration menu from the setup menu and format the hard disk - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 20
1 again. 5 Turn on the power of the extension unit again, and then install (link) all the HDD units in the extension unit by following the instructions in the "Install (link) all the HDD units in the extension unit at the same time (page 25)" section. 20 - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 21
■ HDD Unit To install a hard disk drive in the extension unit, it is necessary to assemble an HDD unit (encase the hard disk drive in the HDD canister). The HDD unit is designed to easily install/remove the hard disk drive in/from the extension unit. Contact your dealer about purchasing, installing, - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 22
1 Fix both sides of the hard disk drive with the dedicat- ed HDD canister using the 4 provided screws for HDD canister installation. Tightening torque for the screws: 0.49 N·m (5 kgf·cm) (use a low-torque powered screwdriver or a torque screwdriver) HDD fixing screw HDD fixing screw 2 Fix the - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 23
■ Handle the hard disk drives The HDD units can be easily installed/removed in/from the HDD slots inside the front cover. Contact your dealer about purchasing, installing, and replacing the hard disk drives. Important: • Hard disk drives are precise devices. Note the following when handling them. • - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 24
the HDD units without stopping the operation. Refer also to the manuals provided with the recorder. 1 After inserting the provided key into HDD status indicator will blink green. To use it for recording, follow the instructions from step 4. Note: • The HDD status indicator sometimes may light green - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 25
available (make them linked) at the same time. Refer also to the manuals provided with the recorder. 1 Install the HDD units in the extension unit. indicator will blink green. To use it for recording, follow the instructions from step 3. The following operations are to be performed on the network - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 26
* When using a recorder (not a network disk recorder), refer to the manuals provided with the recorder for how to operate. ● Remove the HDD units It remove the HDD unit without stopping the operation. Refer also to the manuals provided with the recorder. 1 After inserting the provided key into the - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 27
the disk information. The following can be checked on the "Disk information" page on the setup menu of the recorder. Refer to the manuals provided with the recorder for further information. • Total capacity of the hard disk drive • Available (remaining) capacity of the hard disk drive • Hour - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 28
extension unit at the same time It is possible to remove (link off) all the HDD units in the extension unit. Refer also to the manuals provided with the recorder. 1 After inserting the provided key into the key hole on the front cover, push and turn it to the right to - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 29
When using a recorder (not a network disk recorder), refer to the manuals provided with the recorder for how to operate. ● Determine the operational mode Turn off the power of the power of the extension unit by following the instructions in the "Turn off the power of the extension unit (page 18)" - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 30
alternately: Indicates that the hard disk drive is currently being recovered in the RAID 5/RAID 6 mode. Recorder Error log Refer to the manuals provided with the recorder for further information. • RAID 1DOWN Recorder: MAIN RAIDm 1 DOWN Extension unit: EXTu RAIDm 1 DOWN • RAID 2DOWN Recorder - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 31
● Replacement of a faulty hard disk drive in the RAID mode In the RAID 5 mode, it is possible to read data on the other hard disk drives and recover data even when a single hard disk drive becomes faulty (1DOWN). In the RAID 6 mode, it is possible to read data on the other hard disk drives and - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 32
Troubleshooting Check the following before requesting repair. Contact a dealer if a problem cannot be solved even after checking and trying the solution or if a problem is not described below, or when having a problem with installations. Problem Check item/Remedy Ref. page Power is not turned - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 33
Problem The hard disk drive is not recognized. The HDD status indicator does not light. The HDD unit is not recognized even though the HDD status - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 34
Problem The HDD status indicator lights orange and red alternately even when no recording or playback is or a fire. Remove the power plug from the AC outlet immediately, and refer to qualified service personnel. - Connect the extension unit again after resetting its settings to the default. 21 34 - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 35
are installed.) • Input/output External input connector (EXT IN): High-speed serial interface, 1.5 Gbps (theoretical value), x1 Standard accessories Installation Guide (this book 1 pc. Warranty (for U.S. field only 1 pc. The followings are for installation: Power cord For the NTSC model - Panasonic WJ-HDE400/3000T3 | Installation Guide - Page 36
and Canada: Panasonic System Networks Company of America, Unit of Panasonic Corporation of North America www.panasonic.com/business/ For customer support, call 1.800.528.6747 Three Panasonic Way, Secaucus, New Jersey 07094 U.S.A. Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
 |
 |
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
Installation Guide
Extension Unit
Model No.
WJ-HDE400
WJ-HDE400/G
1
2
3
4
5
6
7
8
9