Panasonic WJ-HDE400/3000T3 Installation Guide - Page 28

Remove all the HDD units in the, extension unit at the same time

Get Panasonic WJ-HDE400/3000T3 PDF manuals and user guides View all Panasonic WJ-HDE400/3000T3 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

● Remove all the HDD units in the extension unit at the same time It is possible to remove (link off) all the HDD units in the extension unit. Refer also to the manuals provided with the recorder. 1 After inserting the provided key into the key hole on the front cover, push and turn it to the right to open the front cover. (1) 7 Select the extension unit (EXT#) to be removed using the arrow button (up or down), and then press the [SET] button. 8 Move the underscore mark below "YES" using the arrow button (left or right), and then press the [SET] button. (2) The following operations are to be performed on the network disk recorder.* 2 Hold down the [USE] button for 2 seconds or more. The buzzer will sound. 3 Press the arrow button (up or down) repeatedly until the "HDD Operation" indication is displayed. 4 Press the [SET] button. 5 Press the arrow button (up or down) repeatedly until the "Remove EXT" indication is displayed. 6 Move the underscore mark below "YES" using the arrow button (left or right), and then press the [SET] button. The shutdown process of the extension unit will start and all the HDD status indicators will start blinking orange. When the shutdown process is complete, all the HDD status indicators will go off. • When the shutdown process of the extension unit on which recording is being performed starts, recording will continue on an HDD unit on another device. Images may sometimes not be recorded for several seconds when switching the HDD unit for recording. If there is no device with an HDD unit for recording, recording will stop. When the [SET] button is pressed, the display on the LCD will return to the time and date menu. 9 Remove all the HDD units from the extension unit after confirming that all the HDD access indicators are off. (1) Hold down the removal knob on the HDD unit. (2) Pull the lever up. (3) Pull the HDD unit out from the HDD slot. Pull the HDD unit out carefully so as not to drop it and handle it gently so as not to give it a shock or vibration. (1) (3) (2) (2) 28

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
28
7
Select the extension unit (EXT#) to be removed using
the arrow button (up or down), and then press the
[SET] button.
8
Move the underscore mark below "YES" using the
arrow button (left or right), and then press the [SET]
button.
The shutdown process of the extension unit will start and
all the HDD status indicators will start blinking orange.
When the shutdown process is complete, all the HDD sta-
tus indicators will go off.
• When the shutdown process of the extension unit on
which recording is being performed starts, recording
will continue on an HDD unit on another device.
Images may sometimes not be recorded for several
seconds when switching the HDD unit for recording. If
there is no device with an HDD unit for recording,
recording will stop.
When the [SET] button is pressed, the display on the LCD
will return to the time and date menu.
9
Remove all the HDD units from the extension unit
after confirming that all the HDD access indicators
are off.
(1) Hold down the removal knob on the HDD unit.
(2) Pull the lever up.
(3) Pull the HDD unit out from the HDD slot.
Pull the HDD unit out carefully so as not to drop it and
handle it gently so as not to give it a shock or vibration.
(3)
(2)
(2)
(1)
●
Remove all the HDD units in the
extension unit at the same time
It is possible to remove (link off) all the HDD units in the exten-
sion unit.
Refer also to the manuals provided with the recorder.
1
After inserting the provided key into the key hole on
the front cover, push and turn it to the right to open
the front cover.
The following operations are to be performed on the net-
work disk recorder.*
2
Hold down the [USE] button for 2 seconds or more.
The buzzer will sound.
3
Press the arrow button (up or down) repeatedly until
the "HDD Operation" indication is displayed.
4
Press the [SET] button.
5
Press the arrow button (up or down) repeatedly until
the "Remove EXT" indication is displayed.
6
Move the underscore mark below "YES" using the
arrow button (left or right), and then press the [SET]
button.
(1)
(2)