Panasonic WJ-HDE400/3000T3 Installation Guide - Page 9

Major operating controls and their functions ■ Front view q w e r tyu i o q LCD Indicates the status of the extension unit (error status, etc.) or the name of the functions available using the buttons on the front panel of the extension unit. w HDD access indicators (HDD1 - HDD9) Indicate the statuses of the hard disk drives. • HDD access indicator (right side) Indicates the status (access/failure) of the respective hard disk drive. When an HDD failure (error) occurs during operation in the RAID 5/RAID 6 mode, the indicator will light/blink red. Off: Indicates that the respective hard disk drive is not being accessed. Blinks green: Indicates that the respective hard disk drive is being accessed. Lights red: Indicates that the respective hard disk drive is faulty (which can be recovered by replacing the hard disk drive). In the RAID 5 mode, it indicates that the hard disk drive is the first faulty drive. In the RAID 6 mode, it indicates that hard disk drives are the first and second faulty drives. Blinks red: Indicates that the respective hard disk drive is faulty (which cannot be recovered even by replacing the hard disk drive). In the RAID 5 mode, it indicates that the hard disk drive is the second faulty drive. In the RAID 6 mode, it indicates that the hard disk drive is the third faulty drive. Lights red and orange alternately: Indicates that the hard disk drive is currently being recovered in the RAID 5/ RAID 6 mode. (It may appear that the indicator lights orange when recovery is being processed at high speed.) Note: Basically, each indicator will indicate the status of the respective hard disk drive (HDD1 - HDD9). Important: • When the indicator lights red in the RAID 5 mode, replace the respective hard disk drive immediately. Contact your dealer about servicing. In the RAID 5 mode: When 2 or more HDD access indica- tors light/blink red, it may be impossible to recover data on the respective hard disk drives. In the RAID 6 mode: When 3 or more HDD access indicators light/blink red, it may be impossible to recover data on the respective hard disk drives. • HDD status indicator (left side) Indicates the operational status of the respective hard disk drive. Lights green: Indicates that the power of the respective hard disk drive (formatted) is on. Blinks green: Indicates that the respective hard disk drive is for playback use only. (Recording is unavailable using the respective hard disk drive.) Blinks orange: Indicates that the respective hard disk drive is currently being formatted or during the recognition process. Lights red: Indicates that formatting of the respective hard disk drive has failed. Off: Indicates that the power of the respective hard disk drive is off, or that the hard disk drive is not connected/recognized. 9