Panasonic WJ-ND400K Setup Information - Page 31
Basics, Basic setup
View all Panasonic WJ-ND400K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Basics Configure the system settings to operate the recorder. Basics Use the following procedure to configure basic system settings. 1 Click the [Basic] button on the setup menu. 2 On the sub-menu that appears, click [Basic]. This will display the setting window. 3 Configure the settings for each item. Refer to "Basic setup" table for details about the settings. 4 Click the [Set] button. Basic setup Item Recording LCD setup lock Password Language Go to last before Buzzer Error output duration Safe shutdown time ♦Initial default Settings Description Off / On♦ Specifies whether recording should be performed. • Recording is not performed when [Off] is selected. Select [On] for this setting except to force a recording to stop. Off♦ / On Locks front panel buttons to prevent them from being operated. • When [On] is selected, buttons can be unlocked by entering a password, but they will re-lock automatically if no operation is performed for a certain period of time (about one minute). Enter password (12345♦) Specifies a password for releasing LCD setup lock. Sets a password of five single-byte characters. Japanese / English♦ / Français / Specifies the language used in browser screens. Español / Deutsch / Italiano / • Contact your dealer for further information about the Russian / Chinese / Custom customized language (Custom). 5s / 10s / 30s♦ / 1min / 5min Specifies the time the image is displayed when the [Go to last] button is clicked on the operation window. Off / 2s♦ / 5s / 10s / 20s / 30s / 1min / Ext Specifies the duration that the buzzer sounds whenever an error occurs on the recorder. • Selecting [Ext] causes the buzzer to continue to sound until the [ERR] button is clicked or the [BUZZER STOP] button on the front panel is pressed. Off / 2s♦ / 5s / 10s / 20s / 30s / 1min / Ext Specifies the duration of the error output whenever an error occurs on the recorder. For details about error output, refer to the Installation Guide. • Selecting [Ext] causes signal output to continue until the [ERR] button is clicked. 10s♦ / 20s / 30s / 1min / 2min / Specifies the time until shutdown starts after a power down 3min / 4min / 5min detection signal is input to the recorder. 31