Panasonic WJ-ND400K Setup Information - Page 64

Port forwarding, Static route, Important, Settings, Description, Parameter

Get Panasonic WJ-ND400K PDF manuals and user guides View all Panasonic WJ-ND400K manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

Network Item Settings Description Domain name Name input (local domain♦) Enter the domain name of the recorder. • Enter up to 255 single-byte alpha-numeric characters, including hyphen (-) and period (.). • Use an alphabetic character as the first character of the domain name. ♦Initial default *1 Refer to "Recorder network settings (page 11)" for information on initial default settings. Important: • A different subnet should be set for each port. • If DHCP is set to [On] and "SD Memory recording" is set, write requests to the camera's SD memory data may fail at startup. This occurs because the response from the DHCP server is slow. Once the address has been obtained from the DHCP server, the error is resolved. Port forwarding Item Port forwarding Port number Settings Off / On♦ Port number input (Camera 1:60001♦ to camera 64:60064♦) ♦Initial default Static route Item Static route setting Address Parameter Off♦ / On Address entry field (Blank♦) Subnet mask Subnet mask entry field (Blank♦) Gateway Gateway entry field (Blank♦) ♦Default Description Specifies whether port forwarding is enabled. When port forwarding is [On], specifies camera port numbers in the range of 1 to 65535. • Do not specify any of the following numbers for an HTTP port number, FTP port number, site alarm port number, or port forwarding port number. 20, 21, 23, 25, 42, 53, 67, 68, 69, 79, 80, 105, 110, 123, 161, 162, 546, 547, 995, 10001, 10002, 10003, 10004, 10005, 10006, 10007 Description Determine whether or not to validate the static route setting. Configure this setting after considering the network connection environment of this product. Enter the destination address. • The following values are unavailable. Broadcast address, loop-back address, class D address, class E address, "000.000.000.000", "111.111.111.111", and any of the address used for the camera port/client PC port/maintenance port. Enter the subnet mask of the destination. • The following values are unavailable. Broadcast address, loop-back address, class D address, class E address, "000.000.000.000", "111.111.111.111", and any of the address used for the camera port/client PC port/maintenance port. Enter the gateway of the destination. • The following values are unavailable. Broadcast address, loop-back address, class D address, class E address, "000.000.000.000", "111.111.111.111", and any of the address used for the camera port/client PC port/ maintenance port and camera port/client PC port maintenance port and another network. 64

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
Network
64
♦
Initial default
*1
Refer to "Recorder network settings (page 11)" for information on initial default settings.
Port forwarding
♦
Initial default
Static route
♦
Default
Domain name
Name input (local domain
♦
)
Enter the domain name of the recorder.
•
Enter up to 255 single-byte alpha-numeric characters,
including hyphen (-) and period (.).
•
Use an alphabetic character as the first character of the
domain name.
Important:
•
A different subnet should be set for each port.
•
If DHCP is set to [On] and "SD Memory recording" is set, write requests to the camera's SD memory data may fail at startup. This occurs
because the response from the DHCP server is slow. Once the address has been obtained from the DHCP server, the error is resolved.
Item
Settings
Description
Port forwarding
Off / On
♦
Specifies whether port forwarding is enabled.
Port number
Port number input
(Camera 1:60001
♦
to
camera 64:60064
♦
)
When port forwarding is [On], specifies camera port numbers in
the range of 1 to 65535.
•
Do not specify any of the following numbers for an HTTP
port number, FTP port number, site alarm port number, or
port forwarding port number.
20, 21, 23, 25, 42, 53, 67, 68, 69, 79, 80, 105, 110, 123, 161,
162, 546, 547, 995, 10001, 10002, 10003, 10004, 10005,
10006, 10007
Item
Parameter
Description
Static route setting
Off
♦
/ On
Determine whether or not to validate the static route setting.
Configure this setting after considering the network connection
environment of this product.
Address
Address entry field
(Blank
♦
)
Enter the destination address.
•
The following values are unavailable.
Broadcast address, loop-back address, class D address,
class E address, "000.000.000.000", "111.111.111.111",
and any of the address used for the camera port/client PC
port/maintenance port.
Subnet mask
Subnet mask entry field
(Blank
♦
)
Enter the subnet mask of the destination.
•
The following values are unavailable.
Broadcast address, loop-back address, class D address,
class E address, "000.000.000.000", "111.111.111.111",
and any of the address used for the camera port/client PC
port/maintenance port.
Gateway
Gateway entry field
(Blank
♦
)
Enter the gateway of the destination.
•
The following values are unavailable.
Broadcast address, loop-back address, class D address,
class E address, “000.000.000.000”, “111.111.111.111”, and
any of the address used for the camera port/client PC port/
maintenance
port
and
camera
port/client
PC
port
maintenance port and another network.
Item
Settings
Description