Panasonic WJ-ND400K Setup Information - Page 34
Emergency recording, Emergency recording settings
View all Panasonic WJ-ND400K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Emergency recording Emergency recording Sets the recording duration or recording rate when performing emergency recording by input of the emergency recording input signal. For details about emergency recording, refer to the Installation Guide. 1 Click the [Emergency rec.] button on the setup menu. This will display the "Emergency rec." window. 2 Configure the settings for each item. Refer to "Emergency recording settings" table for details about the settings. • To configure the settings of a camera that is not shown on the display, click the applicable camera number range above the [Set] button to change the contents of the display. • Clicking a camera number range will save the currently displayed camera settings. 3 Click the [Set] button. Button Functions [Measurement] button : Click to check for proper operation at the specified recording rate. (page 36) Important: • Recording may not be possible for about four seconds immediately after emergency recording is complete. Emergency recording settings Item Recording duration Model Compression Measurement Max. network speed (Mbps) Max. bit rate (ips) Recorder setup Recording rate Settings Description 2s / 5s / 10s♦ / 20s / 30s / 1min / 3min / 5min / 10min / 30min / Manual / Continue Specifies the duration of emergency recording. • Selecting [Manual] records while the emergency recording input signal is being input. Also, recording is performed for a minimum of 8 seconds. • Selecting [Continue] causes recording to continue until the "Alarm [ALM]" button is clicked. Shows the registered model numbers of the cameras. Shows the image compression format for registered camera images. • Refer to "Checking and changing a camera (Manually setting) (page 50)" for details about compression method settings. Shows the maximum bit rate on the network being used when the [Measurement] button is clicked. Shows the maximum recording rate on the network being used when the [Measurement] button is clicked. • A red rate setting value indicates that live images or recording of the image may not be possible at the specified rate. Off♦ / 1ips / 2ips / 3ips / 5ips / 10ips / 15ips / All / I-Frame Specifies the rate of emergency recording. • Available settings differ according to the compression format of the camera. Refer to "Checking and changing a camera (Manually setting) (page 50)" for details about compression method settings. 34