Panasonic WJ-ND400K Setup Information - Page 55

Server, NTP

Get Panasonic WJ-ND400K PDF manuals and user guides View all Panasonic WJ-ND400K manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Server NTP Configures settings for clock adjustment based on an NTP (Network Time Protocol) server. 1 Click the [Server] button on the setup menu. 2 On the sub-menu that appears, click [NTP]. This will display the "NTP Setup" window. 3 Configure the settings for each item. Refer to "NTP settings" table for details about the settings. 4 Click the [Set] button. NTP settings Item Settings Description Time adjustment NTP server address ♦Initial default Off♦ / On Address input (Blank♦) Specifies whether an NTP server is used. Enter the name or IP address of the NTP server. When entering a server name, you must use the DNS. • Enter up to 255 single-byte alpha-numeric characters, including hyphen (-) and period (.). Important: • "Time adjustment" may not operate when the recorder's DHCP setting is [On] and operating, and the time setting for NTP server and recorder are more than 1000 seconds out of sync. • About the NTP Server Function The recorder can operate as a camera's NTP server. When it does, set the port number of the camera to 123. For information about camera settings, refer to the camera operating instructions. 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
55
Server
Configures settings for clock adjustment based on an NTP (Network Time Protocol) server.
1
Click the [Server] button on the setup menu.
2
On the sub-menu that appears, click [NTP].
This will display the "NTP Setup" window.
3
Configure the settings for each item.
Refer to “NTP settings” table for details about the settings.
4
Click the [Set] button.
NTP settings
♦
Initial default
NTP
Item
Settings
Description
Time adjustment
Off
♦
/ On
Specifies whether an NTP server is used.
NTP server address
Address input
(Blank
♦
)
Enter the name or IP address of the NTP server. When entering
a server name, you must use the DNS.
•
Enter up to 255 single-byte alpha-numeric characters,
including hyphen (-) and period (.).
Important:
•
"Time adjustment" may not operate when the recorder's DHCP setting is [On] and operating, and the time setting for NTP server and
recorder are more than 1000 seconds out of sync.
•
About the NTP Server Function
The recorder can operate as a camera's NTP server. When it does, set the port number of the camera to 123.
For information about camera settings, refer to the camera operating instructions.