Panasonic WJ-ND400K Setup Information - Page 63
Camera port/Client PC., 1024Kbps / 2Mbps / 5Mbps
View all Panasonic WJ-ND400K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Network Network settings Item Settings Description NW link down detection Off♦ / On Specifies whether to detect disconnected network connection of Camera port/Client PC. Bandwidth control Unlimited♦ / 32Kbps / 64Kbps / 128Kbps / 256Kbps / 512Kbps / 1024Kbps / 2Mbps / 5Mbps / 10Mbps Specifies the maximum rate for data transmitted to the network. • The transmission amount is not limited in the case of an MPEG-4 live image. Port forwarding Specifies whether port forwarding is enabled. To configure this setting, click the [Setup >>] button. HTTP port number Port number input (80♦) Sets the HTTP port used when sending images in the range of 1 to 65535. Normally this setting is 80. • Depending on network settings, changing the HTTP port number may make communication impossible. If this happens, contact your network administrator. • Do not specify any of the following numbers for an FTP port number, site alarm port number, or port forwarding port number. 20, 21, 23, 25, 42, 53, 67, 68, 69, 79, 105, 110, 123, 161, 162, 546, 547, 995, 10001, 10002, 10003, 10004, 10005, 10006, 10007 FTP port number Port number input (21♦) Specifies the recorder FTP port number in the range of 1 to 65535. Normally this setting is 21. • Do not specify any of the following numbers for an HTTP port number, site alarm port number, or port forwarding port number. 20, 23, 25, 42, 53, 67, 68, 69, 79, 80, 105, 110, 123, 161, 162, 546, 547, 995, 10001, 10002, 10003, 10004, 10005, 10006, 10007 Network setup - Camera port/Client PC port DHCP Off♦ / On Specifies whether a DHCP server is used. • Select [On] to obtain the IP address, subnet mask, and default gateway from a DHCP server. Select [Off] to enter them manually. IP address Address input*1 When [DHCP] is [Off], specify the IP address here. Subnet mask Address input*1 When [DHCP] is [Off], specify the subnet mask here. Default gateway Address input*1 When [DHCP] is [Off], specify the default gateway here. Line speed Auto♦ / 1000M-Full / 100M-Full / Specifies the data line speed. 100M-Half / 10M-Full / 10M-Half Network setup - Maintenance port IP address Address input*1 Specifies the IP address. Subnet mask Address input*1 Specifies the subnet mask. Static route Determine whether or not to validate the static route setting. To configure this setting, click the [Setup >>] button. DNS setup DNS Off♦ / Auto / Manual Specifies whether a DNS is used. • Selecting [Auto] enables auto detection of the DNS server. This setting is available only when [On] is selected for the [DHCP] setting of the Client PC port (page 61). • When [Manual] is selected, a primary address and secondary address can be specified for the DNS server IP address. Primary server address Address input (0.0.0.0♦) Enter the IP address of the primary DNS server. Secondary server address Address input (0.0.0.0♦) Enter the IP address of the secondary DNS server. 63