Pfaff ClassicStyle 2027 Owner's Manual - Page 14
Preparing the machine for bobbin winding, Winding the bobbin from the spool pin, Threading, Turn
View all Pfaff ClassicStyle 2027 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Preparations Preparing the machine for bobbin winding Place an empty bobbin so that the black pin of the bobbin winder snaps into the slot of the bobbin. The Pfaff logo is facing up. Push the bobbin to the right. Note: The bobbin can only be wound if it is moved fully to the right Winding the bobbin from the spool pin Place the sewing thread on the spool pin. To obtain free movement of the thread and hold the thread spool Àrmly, Àt a spool cap of the right size for the thread spool. Threading Place the thread into guide A from the front and pull it counter clockwise around the pre-tension device B. Make sure the B thread is pulled securely inside the pre-tension device for correct thread tension. Pull the thread under the thread guide C (from back to front). Wind the thread tail around the bobbin A several times in a clockwise direction. Turn on the machine Hold the end of the thread Àrmly and press the foot control. As soon as the bobbin is full, the winding action will be stopped automatically. Push the bobbin to the left, cut the thread and remove bobbin from the winder. C 2:4